Non-linear ultrasonic technique to assess fatigue damage in structural steel
نویسندگان
چکیده
A non-linear ultrasonic technique has been used to assess the fatigue damage in low carbon structural steel. The percentage of total harmonic distortion, which is the ratio of the amplitude of 2nd harmonic and the fundamental, has been introduced as the measurement parameter in this paper. It has also been observed that before crack initiation the 2nd harmonic amplitude is comparable to the fundamental. The results have been analysed in light of the dislocation theory for harmonic generation during material degradation. 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
منابع مشابه
Steel Catenary Riser-Seabed Interaction Due to Caspian Sea Environmental Conditions
This paper investigates the integrated riser/vessel system which is subjected to random waves. Riser pipelines are the main components of the oil and gas offshore platforms. Whereas Iran country has been located on the fringes of Caspian Sea deep water, therefore study and research in this area is increasingly essential. The fluctuation of floating production causes the severe response and grea...
متن کاملOn the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization
A series of tests have been conducted to investigate fatigue damage characterization in corroded welded steel plates using structural health monitoring (SHM) techniques. Acoustic Emission (AE) is a non-destructive testing (NDT) technique with potential applications for locating and monitoring fatigue cracks in service. In the present work, AE is implemented to characterize damage during crack e...
متن کاملComparison Study on Neural Networks in Damage Detection of Steel Truss Bridge
This paper presents the application of three main Artificial Neural Networks (ANNs) in damage detection of steel bridges. This method has the ability to indicate damage in structural elements due to a localized change of stiffness called damage zone. The changes in structural response is used to identify the states of structural damage. To circumvent the difficulty arising from the non-linear n...
متن کاملThe use of non-collinear mixing for nonlinear ultrasonic detection of plasticity and fatigue.
This letter reports on the application of the non-collinear mixing technique to the ultrasonic measurement of material nonlinearity to assess plasticity and fatigue damage. Non-collinear mixing is potentially more attractive for assessing material state than other nonlinear ultrasonic techniques because system nonlinearities can be both independently measured and largely eliminated. Here, measu...
متن کاملHealth Monitoring of Welded Steel Pipes by Vibration Analysis
In the present work, structure health monitoring (SHM) of welded steel pipes was used to diagnosis their state via vibration based damage detection techniques. The dynamic quantities such as Frequency Response Functions (FRFs), mode shapes and modal parameters from structural vibration to detect damage were measured, set on linear averaging mode, with a maximum frequency of analysis of 3.2 kHz....
متن کامل