Temperature and Dilatation Estimation for Modern Semiconductor Devices
نویسندگان
چکیده
This paper presents a new approach for measuring physical variables on micro-electronic components. An optical system is used to simultaneously quantify the surface temperature of a component and its expansion. This double acquisition is realized by a Michelson interferometer coupled with a Charge Coupled Device (CCD) line device. To validate this method, the temperature measurements were directly compared with the results obtained by an infrared camera and by a measurement of variation of I (V). The displacement measurements were compared with those obtained by a laser 3D vibrometer, whose physical principle is completely different. Consistent results were obtained regarding the different techniques. Copyright © 2015 IFSA Publishing, S. L.
منابع مشابه
Behavioral Modeling and Simulation of Semiconductor Devices and Circuits Using VHDL-AMS
During the past few years, a lot of work has been done on behavioral models and simulation tools. But a need for modeling strategy still remains. The VHDL-AMS language supports the description of analog electronic circuits using Ordinary Differential Algebraic Equations (ODAEs), in addition to its support for describing discrete-event systems. For VHDL-AMS to be useful to the analog design ...
متن کاملA Temperature Dependent Scalable Large Signal InP/InGaAs DHBT Model
Modern radio frequency and mixed signal circuit design has increasingly relied on compound semiconductor devices to push operating frequencies deep into millimeter-wave range. InP/InGaAs/InP heterojunction bipolar transistors are capable of achieving both a unity current gain frequency (fT) and maximum frequency of oscillation (fMAX) in excess of 300GHz as well as high linearity and good therma...
متن کاملSynthesis and physicochemical properties of CuMn2O4 nanoparticles; a potential semiconductor for photoelectric devices
CuMn2O4 nanoparticles, a semiconducting materials with tunable functionalities in solid oxide fuel cell, was successfully synthesized via a sol-gel method using its respective metal cations sources i.e. Cu2+ and Mn2+ in an appropriate complexing agent.The vibrational frequencies below 1000 cm-1 of the obtained materials confirmed the formation of metal-oxygen (M-O:Cu-O, Mn-O) bond in the sample...
متن کاملNegative bias temperature instability modeling for high-voltage oxides at different stress temperatures
Negative bias temperature instability (NBTI) of pMOS structures is a critical reliability concern for modern semiconductor devices. We propose and evaluate an enhanced NBTI model with the following additions to the standard reaction-diffusion (RD) model [1] (a) coupling to the semiconductor device equations to self-consistently include the oxide field, surface hole concentration, charged carrie...
متن کاملSynthesis and physicochemical properties of CuMn2O4 nanoparticles; a potential semiconductor for photoelectric devices
CuMn2O4 nanoparticles, a semiconducting materials with tunable functionalities in solid oxide fuel cell, was successfully synthesized via a sol-gel method using its respective metal cations sources i.e. Cu2+ and Mn2+ in an appropriate complexing agent.The vibrational frequencies below 1000 cm-1 of the obtained materials confirmed the formation of metal-oxygen (M-O:Cu-O, Mn-O) bond in the sample...
متن کامل