Stable top-up operation at SPring-8.

نویسندگان

  • Hitoshi Tanaka
  • Masatoshi Adachi
  • Tsuyoshi Aoki
  • Takao Asaka
  • Alfred Baron
  • Shin Daté
  • Kenji Fukami
  • Yukito Furukawa
  • Hirofumi Hanaki
  • Naoyasu Hosoda
  • Tetsuya Ishikawa
  • Hiroaki Kimura
  • Kazuo Kobayashi
  • Toshiaki Kobayashi
  • Shinji Kohara
  • Noritaka Kumagai
  • Mitsuhiro Masaki
  • Takemasa Masuda
  • Sakuo Matsui
  • Akihiko Mizuno
  • Takeshi Nakamura
  • Takeshi Nakatani
  • Takashi Noda
  • Toru Ohata
  • Haruo Ohkuma
  • Takashi Ohshima
  • Masaya Oishi
  • Sigeki Sasaki
  • Jun Schimizu
  • Masazumi Shoji
  • Kouichi Soutome
  • Motohiro Suzuki
  • Shinsuke Suzuki
  • Yoshio Suzuki
  • Shirou Takano
  • Masaru Takao
  • Takeo Takashima
  • Hideki Takebe
  • Akihisa Takeuchi
  • Kazuhiro Tamura
  • Ryotaro Tanaka
  • Yoshihito Tanaka
  • Tsutomu Taniuchi
  • Yukiko Taniuchi
  • Kouji Tsumaki
  • Akihiro Yamashita
  • Kenichi Yanagida
  • Yoshitaka Yoda
  • Hiroto Yonehara
  • Tetsuhiko Yorita
  • Masamichi Yoshioka
  • Masaki Takata
چکیده

Top-up operation allows SPring-8 to provide highly stable X-ray beams with arbitrary filling patterns. The implementation of top-up operation is described, with a focus on the simultaneous achievement of stability of stored current, beam orbit, purity of an isolated single bunch, and beam injection efficiency. Stored-current fluctuations have been routinely reduced to a level of 10(-3). Stored-beam oscillation on frequent beam injection, which was originally regarded as the most serious problem, has been successfully suppressed to a sufficiently low level that it never perturbs imaging experiments. Current impurities in nominally empty buckets have been reduced to a level of 10(-9) over more than one week of operation, making possible the measurement of time-resolved spectra using high-current bunches. Finally, excellent injection efficiency, higher than 80%, is routinely obtained, even for small undulator gaps, which is critical for preventing radiation damage to insertion-device magnets and to reduce leakage radiation. The process of achieving highly stabilized top-up operation at SPring-8 and its utility for user experiments are described.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

TOP-UP OPERATION OF SPring-8 STORAGE RING WITH LOW-EMITTANCE OPTICS

We have succeeded in providing stable and three-times more brilliant x-ray beams to users by combining top-up operation with low-emittance optics. The optics with the low emittance of 3nmrad was firstly applied to the user operation in November 2002. Although the low emittance provided the brilliant x-ray, the extremely short beam lifetime much disturbed the precise experiments. Moreover, the a...

متن کامل

Top-up Operation Experience at the Advanced Photon Source

The Advanced Photon Source (APS) is a 7-GeV, thirdgeneration synchrotron radiation source. To provide more stable beam for users, in September 1998 we began commissioning a new operating mode called “top-up.” In this mode, the beam current does not decay but is maintained at a high level using frequent injection, while photon shutters are open and photon beams are delivered to users. The hardwa...

متن کامل

RECENT PROGRESS OF THE SPring-8 FACILITY

Since October 1997, the SPring-8 facility has been operated well and provided high quality photon beams for users. Over this period, various kinds of improvements have been carried out to achieve brilliant and stable photon beams and to make the most of 8-GeV potentiality. At the same time R&D has continued for future radiation sources. In these activities, the largest achievement has been the ...

متن کامل

بررسی تغییرات راکتیویته راکتور MNSR اصفهان در اثر تغییر ضخامت لایه برلیوم سقف قلب راکتور با استفاده از کدهای محاسباتی WIMSD و MCNP و مقایسه با نتایج تجربی

In this work, the Isfahan Miniature Neutron Source Reactor (MNSR) is first simulated using the WIMSD code, and its fuel burn-up after 7 years of operation ( when the reactor was revived by adding a 1.5 mm thick beryllium shim plate to the top of its core) and also after 14 years of operation (total operation time of the reactor) is calculated. The reactor is then simulated using the MCNP code,...

متن کامل

EUROPEAN LABORATORY FOR PARTICLE PHYSICS CERN-PPE/97-21 8 January 1997 “DIAMOND” OVER-COATED MICROSTRIP GAS CHAMBERS FOR HIGH RATE OPERATION

We describe the recent developments on the diamond-like carbon (DLC) over-coated Microstrip Gas Chambers made on drawn glass substrates. MSGC surface coating with thin DLC layer of stable and controlled resistivity was proposed to overcome the limitation of detector operation due to surface charging-up under avalanches. This brings also advantages for the detector manufacturing technology. The ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Journal of synchrotron radiation

دوره 13 Pt 5  شماره 

صفحات  -

تاریخ انتشار 2006