Design of Low Power 4-bit ALU Using Adiabatic Logic
نویسندگان
چکیده
This paper presents the implementation of a 4-bit Arithmetic Logic Unit (ALU) using Complementary Energy Path Adiabatic Logic (CEPAL). This static adiabatic logic has proved its advantage through the minimization of the 1/2CVdd2 energy dissipation occurring every cycle. Firstly, the performance characteristics of CEPAL 4-to-1 multiplexer and full adder are compared against the conventional static CMOS logic counterpart to identify its adiabatic power advantage. Finally, A 4-bit Arithmetic Logic Unit (ALU) is implemented with both the technologies and comparisons have been made. The analysis is carried out using the industry standard EDA design environment using 250 nm technology libraries from Tanner. The results prove that the CEPAL 4-bit ALU is 55% more power efficient than the CMOS 4-bit ALU at 100MHz and at 2.5V operating voltage.
منابع مشابه
Design and Simulation of a 2GHz, 64×64 bit Arithmetic Logic Unit in 130nm CMOS Technology
The purpose of this paper is to design a 64×64 bit low power, low delay and high speed Arithmetic Logic Unit (ALU). Arithmetic Logic Unit performs arithmetic operation like addition, multiplication. Adders play important role in ALU. For designing adder, the combination of carry lookahead adder and carry select adder, also add-one circuit have been used to achieve high speed and low area. In mu...
متن کاملVLSI Implementation of a 4 x 4-bit Multiplier in a Two Phase Drive Adiabatic Dynamic CMOS Logic
An adiabatic logic is a technique to design low power digital VLSI’s. This paper describes the design and VLSI implementation of a multiplier using a two phase drive adiabatic dynamic CMOS logic (2PADCL) circuit. Circuit operation and performance have been evaluated using a 4×4-bit 2PADCL multiplier fabricated in a 1.2 μm CMOS process. The experimental results show that the multiplier was opera...
متن کاملLow Power Combinational and Sequential Circuits with Adiabatic Complementary Pass-Transistor Logic (ACPL)
This paper presents low-power characteristics of adiabatic complementary pass-transistor logic (ACPL) using four-phase AC power supply. Adiabatic CPL circuits consist of pure NMOS transistors, use CPL blocks for evaluation and bootstrapped NMOS switches to eliminate non-adiabatic loss of output loads. In this paper, combinational circuit (4-bit ripple carry adder) and sequential circuit (4-bit ...
متن کاملEfficient Design of Low Power ALU using PTL-GDI Logic Full Adder
In this paper, we proposed a low power 1-bit full adder (FA) with 10-transistors and this is used in the design ALU. 16-bit ALUs are designed and compared with the existing design. The proposed design consists of PTL-GDI adder and mux circuits. By using low power 1-bit full adder in the implementation of ALU, the power and area are greatly reduced to more than 50% compared to conventional desig...
متن کاملDesign and Comparison of Low Power & High Speed 4-bit Alu
An Arithmetic logic Unit (ALU) is an integral part of a computer processor. It has the capability of performing a no. of different arithmetic and logic operations such as addition, subtraction, bit-shifts and magnitude comparison. ALUs of various bit-widths are frequently required in very large-scale integrated circuits (VLSI) from processors to application specific integrated circuits (ASICs)....
متن کامل