Shock Wave Attenuation by Means of Built-in Baffles in a Tube
نویسندگان
چکیده
The transient phenomena of incident shock waves during its passage through an orifice, a diverging nozzle, and a conical disk as baffles in a tube are numerically simulated. The influence of geometrical configurations of the baffles on shock attenuation is investigated. The results show that the conical disk was most effective configuration to weaken the strength of transmitted shock waves, since the pressure close to the inlet of the cone does not increase significantly while the transmitted shock wave is passing downstream in the cone.
منابع مشابه
An Optical Measurement System to Measure Velocity and Provide Shock Wave Pressure Diagrams
This paper introduces an optical measurement system for shock wave characteristics. The system works by mountinga metal plate attached to spring mounts against the shock wavefront. This set is sealed and can plot the shock wave pressure diagram by measuring plate's displacement, radiation and changing the reflection of light during shock wave conflict, and converting these optical data to volta...
متن کاملNumerical analysis of energy transmission through discontinuities and fillings in Kangir Dam
A considerable amount of energy is released in the form of shock wave from explosive charge detonation. Shock wave energy is responsible for the creation of crushing and fracture zone around the blast hole. The rest of the shock wave energy is transferred to rock mass as ground vibration. Ground vibration is conveyed to the adjacent structures by body and surface waves. Geological structures li...
متن کاملWave Propagation Analysis of CNT Reinforced Composite Micro-Tube Conveying Viscose Fluid in Visco-Pasternak Foundation Under 2D Multi-Physical Fields
In this research, wave propagation analysis in polymeric smart nanocomposite micro-tubes reinforced by single-walled carbon nanotubes (SWCNT) conveying fluid is studied. The surrounded elastic medium is simulated by visco-Pasternak model while the composite micro-tube undergoes electro-magneto-mechanical fields. By means of micromechanics method, the constitutive structural coefficients of nano...
متن کاملShock-induced wave propagation over porous and fractured borehole zones: theory and experiments.
Borehole waves are strongly affected by adjacent porous zones or by fractures intersecting the borehole. A theoretical description for both porous and fracture zones is possible based on the introduction of an effective borehole fluid bulk modulus, characterizing the wave attenuation via borehole wall impedance. This impedance can be calculated for both porous and fracture zones adjacent to the...
متن کاملSome Measurements in Channels of of Shock-wave Attenuation Various Cross-Sections
Reports and Memoranda No. 332±* t February, z96z Summary. Apparatus is described for the measurement of shock attenuation.in channels of several configurations. A circular-bore channel, a square-bore channel and converging and diverging channels have been investigated. Measurements of hot-flow duration and wall pressure variations in the shock tube have also been made. It is concluded that conv...
متن کامل