Studies on Automatic Measurement Technology for Surface Braided Angle of Three-Dimensional Braided Composite Material Performs

نویسنده

  • Na Li
چکیده

This paper describes a new measuring algorithm for three-dimensional (3-D) braided composite material .Braided angle is an important parameter of braided composites. The objective of this paper is to present an automatic measuring system. In the paper, the algorithm is performed by using vc++6.0 language on PC. An advanced filtered algorithm for image of 3-D braided composites material performs has been developed. The procedure is completely automatic and relies on the gray scale information content of the images and their local wavelet transform modulus maxims. Experimental results show that the proposed method is feasible. The algorithm was tested on both carbon-fiber and glass-fiber performs. Keywords—Three-Dimensional composite material, Mathematical morphology.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Braided Angle Measurement Technique for Three-dimensional Braided Composite Material Preform Using Mathematical Morphology and Image Texture

This paper describes a new measuring algorithm for estimating the exterior average braided angle of a three-dimensional (3-D) braided composite material preform] based on image texture. In this project, an advanced filtered algorithm for an image of a 3-D braided composite material preform is developed on the basis of mathematical morphology. Median filter algorithms for mathematical morphology...

متن کامل

Modern Applied Science, ISSN 1913-1844, Vol. 1, No. 4, November 2007

Based on the small parameter asymptotic homogenization theory, this article adopts the technology of digitized cell-based finite element method (DCB-FEM) to establish the digital cell-based mechanics analysis model of three-dimensional 4-directional braided composite material, analyzes and calculates the equivalent elasticity performance of 3D braided composite material using homogenization met...

متن کامل

PREDICTING THE STIFFNESS OF BIAXIAL BRAIDED FIBER COMPOSITES BY INCORPORATION OF CARBON NANO FIBER

In this study, carbon nano fibers (CNFs) were mixed into epoxy resin through a magnetic stirrer and again mixed using ultra sonicator. Using hand layup technique, biaxial braided fiber composites were prepared with unfilled, 0.2, 0.5 and 1 wt% CNF. Tensile test and shear test was performed to identify the tensile strength and shear strength of the composites. Fractured surface of the tensile sp...

متن کامل

The use of optimization algorithm for assessing effects of Carboxyl Functionalized MWCNTs on the productivity of nidltrusion process

Among the several available techniques to produce the braided composite rods for construction industry, nidltrusion process is becoming the most widespread and cost-effective continuous processing technique. The work mentions the influence of carboxyl functionalized multiwalled carbon nanotubes (MWCNTs) on the maximum speed of manufacturing process. The epoxy polymer is diglycidyl ether of bisp...

متن کامل

Acoustic Emission Based Defects Monitoring of Three- Dimensional Braided Composites Using Wavelet Network

In order to effectively differentiate all kinds of defects inside the composites, this paper carries out testing on the internal defects of three-dimensional (3d) braided composites by use of acoustic emission nondestructive detecting technology. It puts forward the processing method for acoustic emission signals for the internal defects of three-dimensional braided composites based on wavelet ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2009