Thermal Barrier Ceramic Coatings — A Review
نویسنده
چکیده
Thermal barrier coatings (TBCs) provide effective thermal barrier to the components of gas turbine engines by allowing higher operating temperatures and reduced cool‐ ing requirements. Plasma spraying, electron-beam physical vapor deposition, and sol‐ ution precursor plasma spray techniques are generally used to apply the TBCs on the metallic substrates. The present article addresses the TBCs formed by different proc‐ essing techniques, as well as the possibility of new ceramic, glass-ceramic, and com‐ posite materials as TBCs. Promising bond coat materials for a TBC system have been also stated.
منابع مشابه
A review of thermal barrier coating effects on diesel engine performance and components lifetime
In the present paper, a complete literatures review of thermal barrier coating applications in diesel engines is performed to select a proper type and to find coating effects. The coating system has effects on the fuel consumption, the power and the combustion efficiency, pollution contents and the fatigue lifetime of engine components. Usually there are several beneficial influences by appl...
متن کاملIs Thermal Barrier Coating for Low Heat Rejection in SI Engines or Diesel Engines?
The diesel / gasoline engine rejects about two thirds of the heat energy of the fuel, one-third to the coolant, and one third to the exhaust, leaving only about one-third as useful power output. Theoretically if the heat rejected could be reduced, then the thermal efficiency would be improved, at least up to the limit set by the second law of thermodynamics. Low Heat Rejection (LHR) engines aim...
متن کاملMicrowave Drilling of Ceramic Thermal-Barrier Coatings
The microwave drill is a novel process for creating shaped holes in nonconductive materials. Its inherent material selectivity makes the microwave drill ideally suited for the controlled removal of ceramic coatings from underlying metallic substrates. In this paper, it is shown that the microwave drill process can drill through ceramic thermal barrier coatings (TBCs) to uncover an array of simu...
متن کاملNano Crystalline Ceramic and Ceramic Coatings Made by Conventional and Solution Plasma Spray
Nanostructured ceramic coatings produced by plasma spray processes are being developed for a wide variety of applications that require resistance to wear, erosion, cracking and spallation [1]. In addition the process is being developed to make near net shaped ceramic performs by dissolution of the substrate after spraying. Attractive properties associated with a nanostructure (in general referr...
متن کاملSimulation of the effect of sub- micron interface roughness on the stress distribution in functionally graded thermal barrier coatings (FG- TBC)
In this research, a numerical modeling was utilized to calculate the stresses caused during thermal cycling in a functionally graded thermal barrier coating (FG - TBC). The temperature – dependent material response of this protective material was taken into account and the effects of thermal cycle and interface morphology of the ceramic / metallic layer in functionally graded coating system wa...
متن کامل