Light propagation in conjugated polymer nanowires decoupled from a substrate.

Light propagation in conjugated polymer nanowires , decoupled from substrate

Fabrication of conjugated polymer nanowires by edge lithography.

This paper describes the fabrication of conjugated polymer nanowires by a three stage process: (i) spin-coating a composite film comprising alternating layers of a conjugated polymer and a sacrificial material, (ii) embedding the film in an epoxy matrix and sectioning it with an ultramicrotome (nanoskiving), and (iii) etching the sacrificial material to reveal nanowires of the conjugated polyme...

InP nanowire/polymer hybrid photodiode.

A novel design is presented for a nanowire/polymer hybrid photodiode. n-InP nanowires are grown directly onto an indium tin oxide (ITO) electrode to increase carrier collection efficiency and to eliminate the need for an expensive substrate. Experiments show that an ohmic contact is achieved between the nanowires and the ITO electrode. The nanowires are then enveloped by a high hole mobility co...

Electrical Conductivity Studies on Individual Conjugated Polymer Nanowires: Two-Probe and Four-Probe Results

Two- and four-probe electrical measurements on individual conjugated polymer nanowires with different diameters ranging from 20 to 190 nm have been performed to study their conductivity and nanocontact resistance. The two-probe results reveal that all the measured polymer nanowires with different diameters are semiconducting. However, the four-probe results show that the measured polymer nanowi...

A Solution Processed Flexible Nanocomposite Electrode with Efficient Light Extraction for Organic Light Emitting Diodes

Highly efficient organic light emitting diodes (OLEDs) based on multiple layers of vapor evaporated small molecules, indium tin oxide transparent electrode, and glass substrate have been extensively investigated and are being commercialized. The light extraction from the exciton radiative decay is limited to less than 30% due to plasmonic quenching on the metallic cathode and the waveguide in t...