Preparation and Properties of Magnesium Porous Materials for Medical Applications
نویسندگان
چکیده
Magnesium is a biocompatible and biodegradable metal which possesses suitable mechanical properties for load-bearing applications in orthopaedics. Moreover, magnesium ions, the products of magnesium corrosion, improve growth of the new bone tissue. Implementation of the porosity into these materials compromises values of mechanical properties closer to the values of nature bone and allows the incorporation of the new tissue into the implant and the transport of body fluids to the healing tissue. In this work porous magnesium samples with the porosity of approximately 11, 14, 26, 29 and 44% were prepared and their structures and flexural strengths were studied.
منابع مشابه
Microstructure, in Vitro Corrosion and Mechanical Properties of porous Magnesium-Zinc Nanocomposite Scaffolds
Due to good biocompatibility, corrosion and mechanical properties, magnesium (Mg) is considered promising degradable material for orthopedic applications. In this work, Mg-MgZnx (x= 1, 2, 3 and 4) nanocomposites scaffolds with different porosities were synthesized via powder metallurgy method. The microstructure, composition, in vitro corrosion and mechanical properties of porous magnesium-zinc...
متن کاملInvestigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications
Porous silicon was successfully prepared using metal-assisted chemical etching method. The Effect of HF/H2O2 concentration in etching solution as an affecting parameter on the prepared porosity type and size was investigated. Field emission electron microscopy (FE-SEM) confirmed that all etched samples had porous structure and the sample which was immersed into HF/H2O2 withmolar ratio of 7/3.53...
متن کاملPreparation of Porous and Dense Bulk Samples in Calcium Magnesium Silicate Systems using Steel Slag and Different Additive by Conventional Sintering Method (TECHNICAL NOTE)
In order to obtain the bulk brick like samples, the mixture of steel slag, and sintering aid additive (like dolomite, glass, perlite, borax and phosphate sodium) were sintered at 1100°C for 2 minute. The flat and bloated surface appearances were obtained. The bulk densities of final sintered composites were from 1.3 to 2.41 g/cm3 and total porosities were from 15 to 40%. The bending strengths v...
متن کاملPerforming a Calcium-Phosphate Layer on Porous NiTi Alloy for Using in Orthopedic Applications
Porous NiTi alloys has a series of unique properties such as shape memory effect, superelastic behavior and energy absorbability that make them usable in a wide range of medical and industrial appliances. But the more probability of Ni release from a porous NiTi compare to the nonporous one has restricted it’s uses in implants. In the present research for resolving the problem, performing a cal...
متن کاملHow Porous Nanofibers Have Enhanced the Engineering of Advanced Materials: A Review
Nanofibers are one-dimensional nanomaterialswith a superfine diameter and many potential applicationsdue to their desirable characteristics such as small diameter,high surface area, high flexibility, high porosity, and specialmechanical properties. In the recent years, porous nanofibershave been the subject of considerable research works in awide range of app...
متن کامل