Risk-Informed Safety Margin Characterization
نویسندگان
چکیده
The concept of safety margins has served as a fundamental principle in the design and operation of commercial nuclear power plants (NPPs). Defined as the minimum distance between a system’s “loading” and its “capacity”, plant design and operation is predicated on ensuring an adequate safety margin for safety-significant parameters (e.g., fuel cladding temperature, containment pressure, etc.) is provided over the spectrum of anticipated plant operating, transient and accident conditions. To meet the anticipated challenges associated with extending the operational lifetimes of the current fleet of operating NPPs, the United States Department of Energy (USDOE), the Idaho National Laboratory (INL) and the Electric Power Research Institute (EPRI) have developed a collaboration to conduct coordinated research to identify and address the technological challenges and opportunities that likely would affect the safe and economic operation of the existing NPP fleet over the postulated long-term time horizons. In this paper we describe a framework for developing and implementing a Risk-Informed Safety Margin Characterization (RISMC) approach to evaluate and manage changes in plant safety margins over long time horizons.
منابع مشابه
Risk-Informed Safety Margin Characterization (RISMC): Integrated Treatment of Aleatory and Epistemic Uncertainty in Safety Analysis
The concept of “margin” has a long history in nuclear licensing and in the codification of good engineering practices. However, some traditional applications of “margin” have been carried out for surrogate scenarios (such as design basis scenarios), without regard to the actual frequencies of those scenarios, and have been carried out in a systematically conservative fashion. In the RISMC proje...
متن کاملA Perspective on the Use of Risk Informed Safety Margin Characterization to Support Nuclear Power Plant Long Term Operation
In this paper we describe application of the Risk Informed Safety Margin Characterization (RISMC) approach to enhancements of nuclear power plants that are important to decisions associated with their long term operation. The RISMC approach was used to assess changes in safety margins that would occur due to hypothetical extended power uprates for a PWR loss of feedwater event and a BWR station...
متن کاملRobustness of RISMC Insights under Alternative Aleatory/Epistemic Uncertainty Classifications Draft Report under the Risk-Informed Safety Margin Characterization (RISMC) Pathway of the DOE Light Water Reactor Sustainability Program
DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor Battelle Memorial Institute, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, appara...
متن کاملSafety margin sensitivity analysis for model selection in nuclear power plant probabilistic safety assessment
The safety assessment of Nuclear Power Plants makes use of Thermal-Hydraulic codes for the quantification of the safety margins with respect to upper/lower safety thresholds, when postulated accidental scenarios occur. To explicitly treat uncertainties in the safety margins estimates within the Risk-Informed Safety Margin Characterization (RISMC) framework, we resort to the concept of Dynamic P...
متن کامل