Long-term follow-up of conical crown-retained dentures fabricated using different technologies.
نویسندگان
چکیده
This study presents the results of a long-term clinical evaluation of conical crown-retained dentures fabricated using different technologies. Four different material connections between the outer and inner crowns were used: cast gold/cast gold, cast gold/electroforming, nonprecious alloy/electroforming, and titanium abutment/electroforming. Technical failures and retention values were assessed. The best clinical outcome was found with dentures in which both crowns were cast from gold alloy. The most frequent technical failures were observed in restorations with electroformed outer crowns. Better clinical outcomes were noted when the electroformed outer crowns were used in dentures retained by implants as compared to dentures on natural dentition.
منابع مشابه
PHOTOELASTIC STRESS ANALYSIS OF DISTAL EXTENSION REMOVABLE PARTIAL TELESCOPIC DENTURES WITH DIFFERENT CONICAL CROWNS Konusları Farklı Sonlu Hareketli Bölümlü Protezlerde Fotoelastik Stres Analizi
Distal extension removable partial denture (RPD) can cause stress on supporting hard tissues, which may lead to harmful effects. The purpose of this study is to investigate the pattern of these stresses over the residual alveolar ridge and alveolar bone around the abutment teeth by distal extension conical crown retained te lescop ic dentures (CCRTDs) with different taper angles using three dim...
متن کاملImmediate loading of dental implants in the edentulous maxilla.
OBJECTIVE Immediate loading of dental implants in the edentulous mandible has proven to be an effective, reliable, and predictable procedure. There is little long-term data available on similar treatments in the edentulous maxilla. The aim of the present study was to clinically evaluate edentulous maxilla rehabilitation with removable prostheses supported by the Ankylos SynCone (Dentsply-Friade...
متن کاملFracture Strength of Three-Unit Implant Supported Fixed Partial Dentures with Excessive Crown Height Fabricated from Different Materials
OBJECTIVES Fracture strength is an important factor influencing the clinical long-term success of implant-supported prostheses especially in high stress situations like excessive crown height space (CHS). The purpose of this study was to compare the fracture strength of implant-supported fixed partial dentures (FPDs) with excessive crown height, fabricated from three different materials. MATE...
متن کاملImplant - supported removable partial denture CLÍNICO | CLINICAL
The absence of lower posterior teeth makes the planning and control of removable partial dentures difficult since support is provided by teeth and mucosa, which present different anatomical characteristics. The planning of removable partial dentures supported on a distal implant renders tooth-implant-supported rather than tooth-mucosa-support dentures an option in distal extension cases. In the...
متن کاملProspective cohort pilot study of 2-visit CAD/CAM monolithic complete dentures and implant-retained overdentures: Clinical and patient-centered outcomes.
STATEMENT OF PROBLEM Presently, no studies have evaluated clinical outcomes or patient-centered outcomes for complete dentures fabricated with computer-aided design and computer aided manufacturing (CAD/CAM) technology. PURPOSE The purpose of this prospective cohort pilot study was to evaluate the clinical and patient-centered outcomes for CAD/CAM monolithic dentures fabricated in 2 visits. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The International journal of periodontics & restorative dentistry
دوره 32 4 شماره
صفحات -
تاریخ انتشار 2012