Surface Acoustic Wave Based Magnetic Sensors
نویسندگان
چکیده
Since the radar system was invented in 1922, the development of devices communicating by means of reflected power has experienced a continuously growing interest. In 1948, Harry Stockman published a paper [1] in which he laid the basis for the idea of radio frequency identification (RFID), and the first patent had been filed in 1973 by Charles Walton. After decades of research and commercialization, RFID products became a part of everyday life (e.g. logistics, access control, security). With the growing interest in remote and battery-free devices, researchers are pushing the boundaries of RFID technology to find solutions in new fields like sensing applications.
منابع مشابه
Surface Acoustic Wave Sensors (SAWS): Design for Application
In the modern world, almost all electromechanical systems use sensors to acquire pertinent information from the environment during operation or to operate more effectively. In many of these applications, there is demand for increased performance along with decreased size and cost of sensor technology. Microelectromechanical systems (MEMS) are an attractive option to fill this demand due to the ...
متن کاملTiO2 based surface acoustic wave gas sensor with modified electrode dimensions for enhanced H2 sensing application
The design and optimization of nanostructure-based surface acoustic wave (SAW) gas sensor is analyzed based on TiO2 sensing layer and modified electrode dimensions. The sensitivity of the gas sensor depends upon the type of sensing layer used and active surface area obtained by varying the aspect ratio. The performance of the sensor is observed from 0.1ppm to 100ppm concentration of ...
متن کاملA Study on RF Signal Generator and Analyzer for Passive Surface Acoustic Wave based Wireless Sensors
Sensor technologies are rapidly growing and wireless measurement systems with passive surface acoustic wave (SAW) sensors are broadly used in wide variety of sensor applications. To developing and validating batter-less wireless sensors, generally frequency characteristic of the sensor is analyzed by using an oscilloscope. However, the oscilloscope based system only analyzes simple waveforms. T...
متن کاملReal Time Cascade Impactor Based On Surface Acoustic Wave Delay Lines for PM10 and PM2.5 Mass Concentration Measurement
In this research, Surface Acoustic Wave (SAW) sensors are combined with a cascade impactor to perform real time PM10 and PM2.5 mass concentration measurements. The SAW sensors consist of 125 MHz delay lines based on Love waves propagating on an AT-cut quartz substrate. The Love waves are guided on the substrate's surface using a silica layer. SAW sensors themselves are not capable to discrimina...
متن کاملLatest Trends in Acoustic Sensing
Acoustics-based methods offer a powerful tool for sensing applications. Acoustic sensors can be applied in many fields ranging from materials characterization, structural health monitoring, acoustic imaging, defect characterization, etc., to name just a few. A proper selection of the acoustic wave frequency over a wide spectrum that extends from infrasound (<20 Hz) up to ultrasound (in the GHz–...
متن کاملSensors - Acoustic Wave Technology Sensors
Acoustic wave devices have been in commercial use for more than 60 years. The telecommunications industry is the largest consumer, accounting for ~3 bil lion acoustic wave filters annually, primarily in mobile cell phones and base stations. These are typically surface acoustic wave (SAW) devices, and act as bandpass filters in both the radio frequency and intermediate frequency sections of the ...
متن کامل