Thermal Modelling Analysis of Spiral Wound Supercapacitor under Constant-Current Cycling
نویسندگان
چکیده
A three-dimensional modelling approach is used to study the effects of operating and ambient conditions on the thermal behaviour of the spiral wound supercapacitor. The transient temperature distribution during cycling is obtained by using the finite element method with an implicit predictor-multicorrector algorithm. At the constant current of 2A, the results show that the maximum temperature appears in core area. After 5 cycles, the maximum temperature is 34.5°C, while in steady state, it's up to 42.5°C. This paper further studies the relationship between the maximum temperature and charge-discharge current. The maximum temperature will be more than 60°C after 5 cycles at the current of 4A, and cooling measurements should be taken at that time. It can provide thoughts on inner temperature field distribution and structure design of the spiral wound supercapacitor in working process.
منابع مشابه
Thermal Cycling Impact on Supercapacitor Performance and Leakage Current under Constant Voltage Test
In this paper, we present a comparative study that focus on Supercapacitor (SC) thermal cycling and calendar ageing under constant voltage tests. The impacts of cycling temperature on SC performance and degradation rate are studied. Obtained results from thermal cycling ageing test are compared with those coming from simple calendar ageing test at constant voltage and constant temperature. The ...
متن کاملAn Experimental Investigation on Fracture Analysis of Polymer Matrix Composite under Different Thermal Cycling Conditions
Fracture analysis of glass/epoxy composites under different thermal cycling conditions is considered. Temperature difference, stacking sequence, fiber volume fraction and number of thermal cycles are selected as the experimental design factors. The Taguchi method is implemented to design of the experiment and an apparatus is developed for automatic thermal cycling tests. The tensile tests are d...
متن کاملSurface Degradation of Polymer Matrix Composites Under Different Low Thermal Cycling Conditions
The principal effects of mass degradation on polymer matrix composites (PMCs) are the decay of mechanical properties such as strength, elongation, and resilience. This degradation is a common problem of the PMCs under thermal cycling conditions. In this article, composite degradation was investigated by measurement of total mass loss (TML) using the Taguchi approach. Thermal cycling tests were ...
متن کاملOpen-Hole Size and Thermal Cycling Effects on Mass Loss and Surface Degradation of Polymer Matrix Composites
Degradation is a common problem for polymer matrix composites (PMCs) under low thermal cycling conditions. This paper investigates the effects of low thermal cycling on total mass loss (TML) and surface degradation of PMCs. Unnotched and open-hole specimens were weighed before and after low thermal cycling. The total mass loss and surface degradation of the specimens were studied over 250 cycle...
متن کاملEquivalent Circuit Model of Supercapacitor for Self- Discharge Analysis - A Comparative Study
Self-discharge of supercapacitor is an important phenomenon that needs to be considered carefully, especially for the applications like wireless sensor networks, memory backup systems, etc. Different types of models have been proposed by the various researchers to capture the supercapacitor dynamics. In this paper, two electrical equivalent circuit models, variable leakage resistance (VLR) mode...
متن کامل