Assessing heat-adhesive emulsions for tack coats

نویسنده

  • R. Miró Recasens
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Evaluation of the Effect of Heat-adhesive Emulsions for Tack Coats with Shear Test from the Road Research Laboratory of Barcelona

The use of conventional emulsions for tack coats can cause problems as they frequently stick to the tires of construction vehicles. Consequently the bond between the asphalt layers is inadequate. The importance of tack coats in the performance of the pavement means that bituminous emulsions are constantly being improved. Recently, new types of emulsions have been developed from very low penetra...

متن کامل

Structural and tribometric characterization of biomimetically inspired synthetic "insect adhesives"

Background: Based on previous chemical analyses of insect tarsal adhesives, we prepared 12 heterogeneous synthetic emulsions mimicking the polar/non-polar principle, analysed their microscopical structure and tested their adhesive, frictional, and rheological properties. Results: The prepared emulsions varied in their consistency from solid rubber-like, over soft elastic, to fluid (watery or oi...

متن کامل

Influence of Setting Time of Tack Coat on Bond Strength of Bituminous Paving Layers

Poor adhesion between two successive bituminous layers causes adverse effects on the structural strength of the pavement and develops a numbers of premature failure. To improve the adhesion, it is a general practice to apply a tack coat over an existing or newly constructed bituminous surface before laying another bituminous layer. The main objective of this study is to explore the influence of...

متن کامل

Preparation of an Adhesive in Emulsion for Maxillofacial Prosthetic

Maxillofacial prostheses is a dental medicine specialty aimed at restoring anatomical facial defects caused by cancer, trauma or congenital malformations through an artificial device, which is commonly attached to the skin with the help of an adhesive. The purpose of our research was to develop a pressure-sensitive adhesive (PSA) based on acrylic monomers, characterizing and determining its dry...

متن کامل

Effect of Monomer Composition on Adhesive Performance for Waterborne Acrylic Pressure-Sensitive Adhesives

A series of pressure-sensitive adhesives (PSAs) with different monomer composition was prepared using emulsion polymerisation. The monomers were butylacrylate (BA), 2-hydroxyethyl acrylate (2-HEA), acrylic acid (AA) and 2-ethylhexyl acrylate (2-EHA). The adhesive performance was studied at 4%, 8% and 12% 2-EHA content based on total monomer (BOTM) composition. The adhesives obtained with consta...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2005