Use of Acoustic Waves for Pulsating Water Jet Generation
نویسنده
چکیده
منابع مشابه
Experimental verification of the quasi-steady approximation for aerodynamic sound generation by pulsating jets in tubes.
Voice production involves sound generation by a confined jet flow through an orifice (the glottis) with a time-varying area. Predictive models of speech production are usually based on the so-called quasi-steady approximation. The flow rate through the time-varying orifice is assumed to be the same as a sequence of steady flows through stationary orifices for wall geometries and flow boundary c...
متن کاملDetermination of sediments diameter using acoustic waves
The use of acoustic waves in researches related to sea water is of most importance among scientists recently. Since these waves are the only waves, transmitted in water with lowest attenuation and high speed, they can be used in many scientific fields. The main goal of this research is to better understand the physics and mechanisms of sound-seabed interaction, including acoustic penetration, p...
متن کاملHeat Transfer under Double Turbulent Pulsating Jets Impinging on a Flat Surface
In this study, the numerical analysis of turbulent flow and heat transfer of double pulsating impinging jets on a flat surface has been investigated. The unsteady two-dimensional numerical solution for two similar and dissimilar jets was performed using the RNG k-ε model. The results showed that the RNG k-ε model has more satisfactory predictions of the Nusselt number distribution. Comparisons ...
متن کاملStudy about heat transfer coefficient of water-nanofluid in pulsating heat pipes
Pulsating heat pipe is an efficient heat exchange device which is being used for cooling and heating recovery. In the present work, we made a closed-loop pulsating heat pipe with six U-turns and we used water in our system. Moreover the use of water-Fe3O4 nanofluid was studied with two different filling ratios 40% and 50% and 1% mass concentration. At the end we calculated heat resistance and h...
متن کاملStudy about heat transfer coefficient of water-nanofluid in pulsating heat pipes
Pulsating heat pipe is an efficient heat exchange device which is being used for cooling and heating recovery. In the present work, we made a closed-loop pulsating heat pipe with six U-turns and we used water in our system. Moreover the use of water-Fe3O4 nanofluid was studied with two different filling ratios 40% and 50% and 1% mass concentration. At the end we calculated heat resistance and h...
متن کامل