Experiments on ceramic formation from liquid precursor spray axially injected into an oxy-acetylene flame
نویسندگان
چکیده
An aqueous ceramic precursor solution was sprayed axially into an oxy-acetylene flame to produce yttria-stabilized zirconia ceramic deposits. Temperature and velocity fields of the oxy-acetylene flame were characterized by chemiluminescence and particle image velocimetry. Deposit samples were extracted from the flame at several downstream locations to study deposit evolution. The deposit phase and morphology were determined from Raman spectroscopy and scanning electron microscopy. Formation of the ceramic material commenced at around 4 cm distance from the injection point. The spectral peaks of the t 0-phase of yttria-stabilized zirconia increased with increasing downstream distance whereas those of the precursor decayed. 2005 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
منابع مشابه
Morphology of ceramic particulates formed in a premixed oxygen/acetylene flame from liquid precursor droplets
This study concerns high temperature flame synthesis of ceramic deposits utilizing a mono-disperse stream of droplets composed of an aqueous precursor. The droplets were injected into an oxy-acetylene flame. Mono-disperse droplets were generated with an electrostatic spray technique. High-speed droplet images suggest evidence of shedding of small particulates from the droplet surface as they en...
متن کاملModeling of precipitate formation in precursor droplets injected axially into an oxygen/acetylene combustion flame
A computational heat and mass transfer model of ceramic precursor solution containing droplets injected into a combustion flame is presented. Upon heat-up and vaporization, the precursor in droplets precipitate and ultimately form the ceramic material. Temperature and solute concentration distributions were computed to estimate the precipitation zones within droplets based on a simple homogeneo...
متن کاملModeling of liquid ceramic precursor droplets in a high velocity oxy-fuel flame jet
Production of coatings by high velocity oxy-fuel (HVOF) flame jet processing of liquid precursor droplets can be an attractive alternative method to plasma processing. This article concerns modeling of the thermophysical processes in liquid ceramic precursor droplets injected into an HVOF flame jet. The model consists of several sub-models that include aerodynamic droplet break-up, heat and mas...
متن کاملModeling of thermo-physical processes in liquid ceramic precursor droplets injected into a plasma jet
Modeling of liquid ceramic precursor droplets axially injected into a plasma is presented. Droplets undergo heating and solvent vaporization leading to high solute concentration near droplet surface. At a critical solute super-saturation concentration, precipitation is postulated to occur forming a precipitate shell around liquid core. Internal pressurization and rupture of shell occur subseque...
متن کاملExperimental Investigation on Flame Straightening of Corrosion Resistant Structural Steel Sheet Used for Rolling Stock
Flame straightening is a common procedure used for repair work in steel components. It is based on heating a local region of the part by means of a flame torch. Due to the obstruction of the heat expansion, upsetting occurs in the work material. During cooling of the squashed zone shrinkage occurs and that is associated with tension forces which lead to the desired deformation. This process is ...
متن کامل