Cyclic Voltammetric Behavior of Nitrogen-Doped Tetrahedral Amorphous Carbon Films Deposited by Filtered Cathodic Vacuum Arc

نویسندگان

  • N. W. Khun
  • E. Liu
  • H. W. Guo
چکیده

Nitrogen-doped tetrahedral amorphous carbon (ta-C :N) films were deposited by filtered cathodic vacuum arc (FCVA) technique using nitrogen as a background gas. The structure of the ta-C :N films was studied with X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy in terms of nitrogen flow rate used during the film deposition. Potential windows of the films measured in deaerated and unstirred solutions, such as 0.5 M HCl, 0.1 M KCl, 0.1 M NaCl, 0.1 M KOH, and 0.1 M NaOH, were about 2.4, 2.32, 3.2, 3.1, and 3.25 V, respectively. This study showed that the potential windows of the ta-C :N films were also affected by nitrogen flow rate. The ta-C :N films used in this study had the desired voltammetric characteristics suitable for electrochemical analysis.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Properties of nitrogen doped tetrahedral amorphous carbon films prepared by filtered cathodic vacuum arc technique

The properties of nitrogen doped tetrahedral amorphous carbon films prepared by the filtered cathodic vacuum arc technique have been studied. The doping species, nitrogen ions, were produced by an ion beam source. The nitrogen flow rate was varied from 0.5 to 10 sccm while keeping other deposition conditions constant. The nitrogen content in deposited films was determined by Rutherford backscat...

متن کامل

The effect of nitrogen on the mechanical properties of tetrahedral amorphous carbon films deposited with a filtered cathodic vacuum arc

The mechanical properties of both undoped and nitrogen containing tetrahedral amorphous carbon (ta-C and ta-C:N ) films, such as hardness and E-modulus, are investigated. The mechanical properties are related to the film structures. The ta-C and ta-C:N films are prepared in a filtered cathodic vacuum arc process. Nanoindentation testing is used to measure the mechanical properties of these film...

متن کامل

Linear sweep anodic stripping voltammetry of heavy metals from nitrogen doped tetrahedral amorphous carbon thin films

Nitrogen doped tetrahedral amorphous carbon (ta-C:N) thin films were deposited on p-Si (1 11) substrates (1×10−3 to 6×10−3 cm) by a filtered cathodic vacuum arc technique with different nitrogen flow rates (3 and 20 sccm). The ta-C:N film coated samples were used as working electrodes to detect trace heavy metals such as zinc (Zn), lead (Pb), copper (Cu) and mercury (Hg) by using linear sweep a...

متن کامل

Corrosion behavior of nitrogen doped diamond-like carbon thin films in NaCl solutions

Nitrogen doped tetrahedral amorphous carbon (ta-C:N) thin films were grown on p-Si(1 1 1) substrates using filtered cathodic vacuum arc (FCVA) deposition by varying nitrogen flow rate. The effect of nitrogen flow rate on the corrosion performance of the films was investigated through potentiodynamic polarization and immersion tests in 0.6 M NaCl solutions. The polarization results showed that t...

متن کامل

Deposition of permalloy films by filtered cathodic vacuum arc

The filtered cathodic vacuum arc technique was employed to deposit magnetic films such as FeNi on silicon substrate. Using the normal cathode design, tetrahedral amorphous carbon and metals films can be deposited. If a magnetic target is used, the arc spot always preferably moves to the edge of the target and then extinguishes. Therefore, the arc is not stable and no film can be deposited. A ca...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008