Dynamic Characteristics for E-shaped Core Transverse Flux Machine
نویسندگان
چکیده
This paper presents the dynamic characteristics of the transverse flux linear motor (TFLM) with permanent magnet (PM) excitation, which has E-shaped core. Because of the inherent feature of TFLM with PM excitation that the flux flow path is threedimension, the solid type stators and mover cores are used. In case of adoption of solid type stators and mover cores, as the motor speed is increased, the more core loss will be increased compared to lamination mover cores. So the dynamic performance of motor will be decreased at high speed. The power factor and core loss of E-shaped core type TFLM with PM excitation are investigated in this paper.
منابع مشابه
Nonlinear Model of Tape Wound Core Transformers
Recently, tape wound cores due to their excellent magnetic properties, are widely used in different types of transformers. Performance prediction of these transformers needs an accurate model with ability to determine flux distribution within the core and magnetic loss. Spiral structure of tape wound cores affects the flux distribution and always cause complication of analysis. In this paper, a...
متن کاملLinear Transverse Flux Reluctance Machine with Permanent Magnets
A new structure of linear transverse flux machine (TFM) is presented in this paper. It is in fact a variable reluctance linear machine having permanent magnets on the mover. Its structure and its working principle will be discussed. After a preliminary design of the motor a 3D FEM analysis was carried out before optimizing the designed linear motor. The flux densities in the machine and the sta...
متن کاملSoft Magnetic Composites Used for the Iron Core of the Electrical Machines
The electrical machines had a lot of benefits upon the developments made in the last years in the powder material industry. This statement is well proven by the coming out in the last two decades of the transverse flux machines (TFM). The iron core of most of these machines is built of soft magnetic composite (SMC), which allows three-dimensional flux paths. In this paper measurements of a SMC ...
متن کاملInvestigation of Demagnetization Effect in an Interior V-Shaped Magnet Synchronous Motor at Dynamic and Static Conditions
Permanent magnet motors have been considered for a variety of applications due to their features such as high power density and high efficiency. One of the issues that should be investigated in the design of these motors is the demagnetization problem. Usually, the demagnetization analysis is carried out in a steady state, while demagnetization effect in dynamic condition is more considerable d...
متن کاملStator Core with Slits in Transverse Flux Rotary Machine to Reduce Eddy Current Loss
This paper presents an eddy current loss analysis for a transverse flux rotary machine (TFRM) with laminated stator cores, which consist of inner and outer cores whose laminated directions are perpendicular to each other. Although the TFRM is laminated to reduce eddy current losses, it still exhibits rapidly increasing core losses as the frequency increases. To solve this problem, slits are int...
متن کامل