Improvement of Active Noise Control Performance by Changing Reference Signal
نویسندگان
چکیده
The LMS (Least-Mean-Square) algorithm, which can obtain the complex transfer function in real-time, allows the changes of noise characteristics and the environment of system, thereby maintaining the convergence performance. Therefore, many algorithms based on the LMS algorithm have been modified to solve for some practical considerations, and the FXLMS (Filtered-X LMS) algorithm has been widely investigated and applied as a feed-forward control scheme for an active control system. In 3-dimensional space system, measurement of the signal (reference and error) is more important than control algorithm. However, almost studies were focused on ANC (Active Noise Control) algorithm. In this paper, FXLMS algorithm is applied to the experiment on the ANC of the 3-dimensional enclosure system. And evaluate the ANC performance by changing the location of reference signal.
منابع مشابه
Improving the velocity tracking of cruise control system by using adaptive methods
Accurate and correct performance of controller in cruise control systems is important. Hence, in such systems, controller should optimize itself against noise and probable changes in system dynamic. As a matter of fact, in this article three approaches have been conducted to-ward this purpose: MIT, direct estimation and indirect estimation. These approaches are used as controllers to track refe...
متن کاملA High Performance Feedback Active Noise Control System
In many active noise control (ANC) applications, an online secondary path modelling method that uses a white noise as a training signal is required. This paper proposes a new feedback ANC system. Here we modified both the FxLMS and the VSS-LMS algorithms to raised noise attenuation and modelling accuracy for the overall system. The proposed algorithm stops injection of the white noise at the op...
متن کاملA High Performance Feedback Active Noise Control System
In many active noise control (ANC) applications, an online secondary path modelling method that uses a white noise as a training signal is required. This paper proposes a new feedback ANC system. Here we modified both the FxLMS and the VSS-LMS algorithms to raised noise attenuation and modelling accuracy for the overall system. The proposed algorithm stops injection of the white noise at the op...
متن کاملNovel Hierarchical Control of VSI-based Microgrids Against Large-Signal Disturbances
This paper provides a novel hierarchical control for VSI-based microgrids. The advantage of the provided control scheme is to maintain the frequency and voltage stability and load sharing against large-signal disturbances. A hierarchical control, consisting of three levels, is described. A new control loop based on PI controller, is presented. The new control loop has a great impact on increasi...
متن کاملA Robust Feedforward Active Noise Control System with a Variable Step-Size FxLMS Algorithm: Designing a New Online Secondary Path Modelling Method
Several approaches have been introduced in literature for active noise control (ANC)systems. Since Filtered-x-Least Mean Square (FxLMS) algorithm appears to be the best choice as acontroller filter. Researchers tend to improve performance of ANC systems by enhancing andmodifying this algorithm. This paper proposes a new version of FxLMS algorithm. In many ANCapplications an online secondary pat...
متن کامل