POD/POS curves for non-destructive examination
نویسنده
چکیده
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording or otherwise) without the prior written permission of the copyright owner. Neither the Executive, nor the contractors concerned assume any liability for the reports nor do they necessarily reflect the views or policy of the Executive.
منابع مشابه
Bayesian Framework Combination of Simulated and Experimental Data for Improved Estimation of Probability of Detection Curves
The uncertainties in non-destructive evaluation (NDE) inspections have over the years been represented using ‘probability of detection’ or ‘POD’ curves. Determination of POD capabilities of NDE methods for different flaw types is often an experimentation and personnel intensive operation. Analytical or numerical simulations can provide convenient prior estimates, but integrating simulation resu...
متن کاملEvaluation of POD Curves Based on Simulation Results
When performing a non-destructive inspection a certain amount of uncertainty has to be associated with the result. For instance, fluctuations may be observed for signals generated by nominally identical flaws or alternatively, for signals obtained by repeated scans of the same flaw. These fluctuations result from the large number of influencing factors such as small variations the material and ...
متن کاملTheoretical Explanation for the Empirical Probability of Detection POD Curve A Neural Network Motivated Approach
For non destructive testing of aerospace structures it is extremely important to know how the probability of detecting a fault depends on its size Recently an empirical formula has been found which described this dependence In this paper we provide the theoretical justi cation for this formula by using methods motivated by the neural network approach I Formulation of the Problem For non destruc...
متن کاملMeasurement and Modelling of the Rubber Resilience based on Ultrasonic Non-destructive Testing in Tires
In tire industry, it is very crucial to evaluate physical and mechanical properties of the rubber which is used for production of the tire, to ensure the quality of the final product. Resilience is an important property of a rubber, which cannot be evaluated through direct measurement in production cycle in this industry. Therefore, non-destructive ultrasonic testing, which has been used in man...
متن کاملSimulation-based Non-destructive Inspection Scheduling of Steel Bridges
A procedure for selecting an optimal NDI (non-destructive inspection) technique and associated schedule for fracture-critical member inspections on a specific steel bridge is presented. Information related to the probability of detection (POD) function (a measure of inspection quality) of alternative NDI techniques is utilized. Calculations based on use of the POD function together with Monte C...
متن کامل