The Reaction Kinetics of Dimethyl Ether. I: High- Temperature Pyrolysis and Oxidation in Flow Reactors
نویسندگان
چکیده
Dimethyl ether reaction kinetics at high temperature were studied in two different flow reactors under highly dilute conditions. Pyrolysis of dimethyl ether was studied in a variable-pressure flow reactor at 2.5 atm and 1118 K. Studies were also conducted in an atmospheric pressure flow reactor at about 1085 K. These experiments included trace-oxygenassisted pyrolysis, as well as full oxidation experiments, with the equivalence ratio ( ) varying from 0.32 3.4. On-line, continuous, extractive sampling in conjunction with Fourier Transform Infra-Red, Non-Dispersive Infra-Red (for CO and CO2) and electrochemical (for O2) analyses were performed to quantify species at specific locations along the axis of the turbulent flow reactors. Species concentrations were correlated against residence time in the reactor and species evolution profiles were compared to the predictions of a previously published detailed kinetic mechanism. Some changes were made to the model in order to improve agreement with the present experimental data. However, the revised model continues to reproduce previously reported high-temperature jet-stirred reactor and shock tube results. 2000 John Wiley & Sons, Inc. Int J Chem Kinet: 32: 713–740, 2000
منابع مشابه
KINETIC STUDIES USING SEMI-EMPIRICAL SELF- CONSISTENT FIELD (SCF) MOLECULAR ORBITAL (MO) METHOD: PARTI. A MODIFIED NEGLECT OF DIATOMIC OVERLAP (MNDO) STUDY OF THE PYROLYSIS OF ETHYL VINYL ETHER
Using a computer code called MOPAC, an acronym for a general Molecular Orbital Package (Quantum Chemistry Programme Exchange (QCPE) Programme No. 455), the geometries and heats of formation of the reactant, the products and the trdnsition state were computed by the MNDO semi- empiricalself consistent field (SCF) method for the pyrolysis of ethyl vinyl ether. ((Force))calculation on the reac...
متن کاملHydrogen production by steam reforming of dimethyle ether over Cu/ZnO/Al2O3 and H-ZSM-5 catalysts: An experimental and modeling study
Hydrogen was produced by steam reforming of dimethyl ether (DME) using a physical mixture of commercial HZSM-5 zeolite (for DME hydrolyzing) and Cu/ZnO/Al2O3 (for methanol steam reforming) as a catalyst in a fixed bed reactor. The experiments were performed at atmospheric pressure and in a temperature range from 270 to 310 °C. The effects of feed temperature and gas hourly space velocity (GHSV)...
متن کاملPreparation of H-ZSM-5 Nano-Zeolite Using Mixed Template Method and its Activity Evaluation for ethanol to DME Reaction
H-ZSM-5 nano-zeolites were synthesized by hydrothermal method using tetrapropylammonium hydroxide (TPAOH) as a template in the presence of various TPABr concentrations. The effect of different TPABr/TPAOH molar ratios was studied on the catalytic performance of dehydration of methanol to dimethyl ether (DME) in a fixed bed reactor under the same operating conditions (T=300°C, P=1 atm, and WHSV=...
متن کاملHollow alumina nanospheres as novel catalyst for the conversion of methanol to dimethyl ether
This paper investigates hollow and porous alumina nanospheres that were previously synthesized to be used for the dehydration of methanol to dimethyl ether (DME). As hollow nanostructures possess characteristics such as low density and high surface to volume ratio, their catalytic activity between hollow and porous structure is compared. For this purpose, three most important parameters (acidit...
متن کاملApplication of Novel Gamma Alumina Nano Structure for Preparation of Dimethyl ether from Methanol
In this study, preparation of nano-sized gamma alumina with high specific surface area and high yield by thereaction between aluminum nitrate and sodium carbonate, without using any surfactant is reported. Bohemite (Aluminum oxyhydroxide) was prepared as a precursor by strict control of pH and reaction temperature. The gel produced was purified by washing fol...
متن کامل