High-pressure synthesis of novel lithium niobate- type oxides
نویسندگان
چکیده
We found that two lithium niobate-type oxides, CdPbO3 and PbNiO3 were synthesized by high-pressure as metastable low-pressure perovskite-type phases. We then discussed the stability of lithium niobate-type and perovskite-type oxides relative to oxides with other structure for ABO3 compounds. Consequently, the tolerance factor of perovskite is not the only predominant one to determine the stability and the crystal field effects of 3d transition metal ions are also important.
منابع مشابه
New synthesis of nanosized niobium oxides and lithium niobate particles and their characterization by XPS analysis.
This work presents a new synthesis of nano-sized lithium niobate particles by a low temperature three steps procedure. The complete protocol implies a LiH induced reduction of NbCl5 followed by in situ spontaneous oxidation into low valence niobium nano-oxides. These niobium oxides are exposed to air atmosphere leading to pure Nb2O5 formation. Finally, the stable Nb2O5 is converted into lithium...
متن کاملNiobates Nanowires: Synthesis, Characterization and Applications
Perovskite oxides such as alkaline niobates crystal possess many interesting properties including piezoelectricity, pyroelectricity, electro-optic and nonlinear optical response (Bhalla et al., 2000). The most common alkaline niobates material is lithium niobate (LiNbO3). Since the discovery of LiNbO3 ferroelectricity (Matthias & Remeika, 1949), its properties are widely exploited by electronic...
متن کاملSynthesis, characterization and cycling performance of novel chromium oxide cathode materials for lithium batteries
Chromium oxide (CrOx) cathode material (with chromium oxidation state of +5.3) was synthesized by thermal decomposition of chromium trioxide at high temperature and pressure in oxygen atmosphere. The duration of thermal decomposition had a significant effect on the performance of these materials in terms of lithiation capacity. The detrimental effect of CrO3 and lower oxidation state chromium o...
متن کاملPreparation and Properties of Thin Film Materials with Perovskite Type Structure (mixed Oxides Abo3)
Barium Titanate (BaTiO3) and Lithium Niobate (LiNb03) thin films (0,2 to 1 pm) were deposited ont0 Platinum foils and Silicon wafers (M. 1. S. capacitor structure). In the present work, polycristalline films which had been prepared by R. F. cathodic sputtering of ceramic targets were studied. With a substrate temperature below 300 OC during the deposition, good insulating amorphous films with a...
متن کاملOxygen‐Rich Lithium Oxide Phases Formed at High Pressure for Potential Lithium–Air Battery Electrode
The lithium-air battery has great potential of achieving specific energy density comparable to that of gasoline. Several lithium oxide phases involved in the charge-discharge process greatly affect the overall performance of lithium-air batteries. One of the key issues is linked to the environmental oxygen-rich conditions during battery cycling. Here, the theoretical prediction and experimental...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010