Non-Destructive Evaluation of Launch Tube Welds with Radiography
نویسنده
چکیده
The non-destructive testing of launch tube weld with radiography was investigated and evaluated with AWS D1.1 standard. The paper started with preparation of launch tube and radiographic inspection. X-Ray inspection then was done and gotten the result. The judgment of inspection results were concluded by certified person and finally, the evaluation with AWS D1.1 standard was conducted as well. The result shown that weld position P1 was not conformed to AWS D1.1 which allowed size of incomplete penetration did not exceed 4 mm. The other welds were corresponded to as mentioned standard. Additionally, the corrective actions for incomplete penetration either provided for future actions. Keywords—Non-destructive evaluation, Weld, Launch tube, Radiography
منابع مشابه
Effect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding
The purpose of this study was to examine the effect of adding Nano particles such as Nano Carbon Tube during Friction Stir Welding (FSW) on dissimilar Al alloy joints. More specifically, both FSW and Friction Stir Processing (FSP) were performed simultaneously to investigate the effect of adding Nano particles on mechanical properties and microstructure of the weld zone for joining AA5754-H22 a...
متن کاملEffect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding
The purpose of this study was to examine the effect of adding Nano particles such as Nano Carbon Tube during Friction Stir Welding (FSW) on dissimilar Al alloy joints. More specifically, both FSW and Friction Stir Processing (FSP) were performed simultaneously to investigate the effect of adding Nano particles on mechanical properties and microstructure of the weld zone for joining AA5754-H22 a...
متن کاملAchieving greater efficiency in NDT inspections
Describes the application of an ultrasonic sensing system for the non-destructive inspection of welds as an alternative to X-rays. Replacing radiography with ultrasound not only allows faster, more economical inspections but also eliminates the health and safety risks associated with radiography. In practical terms that means there is no need to evacuate the site for inspection purposes ± const...
متن کاملApplication of Micro Focal X-ray Technique for Radiography of Tube to Tubesheet Welds of Fbr Steam Generator
Fast Breeder Reactor (FBR) steam generator assembly, is a shell and tube heat exchanger. In this equipment, steam is generated by the transfer of heat from sodium on shell side to water on tube side. Due to inherent dangers of sodiumwater reaction, the integrity and leak tightness of weld joints separating sodium and water/steam is very important. The tube to tube sheet (TTS) weldsin steam gene...
متن کاملAn Non Destructive Test for the Detection of Weld Defects Using Image Processing
Received Sep 9, 2017 Revised Dec 20, 2017 Accepted Jan 7, 2018 Welding is a fabrication of joining materials into one component. Defects are unavoidable during the welding process, and hence the inspection of welds is a most important task in many industries. In this work, a Computer Aided Detection (CAD) system is designed to detect weld defects based on image processing techniques. It is a no...
متن کامل