Experimental Study on Punching Performance of Recycled Aggregate Concrete Thin Wallboard with Single-Layer Reinforcement
نویسندگان
چکیده
Recycle Aggregate Concrete (RAC) is a common “green” product used for a variety of purposes, although the durability and strength of the material still need more research to adequately determine influences on these parameters. The failure pattern, punching bearing capacity, and deflection variation of wallboard of both ordinary concrete and RAC with various rebar reinforcement diameters and spacing were analyzed. Based on experimental data, the ABAQUS finite element analysis of the thin wallboard was performed, and the calculated results are in good agreement with the experimental results. The results show that the failure characteristics of ordinary concrete wallboards and RAC wallboards are similar, but the brittleness of the RAC specimens is more significant. Under the same reinforcement ratio, concrete material, whether new or recycled, had little effect on the punching bearing capacity of the specimens. In the case of a low reinforcement ratio, increasing the reinforcement ratio (decreasing the spacing of steel bars) can effectively improve the bearing capacity of the wallboard. Under the same reinforcement ratio, the wallboard with larger diameter and larger spacing has a higher bearing capacity and less deformation after failure.
منابع مشابه
Performance of High-strength Concrete Made with Recycled Ceramic Aggregates
Recent scientific concerns to achieve sustainability in construction have suggested the implementation of using recycled aggregate in concrete because it has the potential to reduce the demand for extraction of natural raw materials and decrease the volume of wastes landfilled. In this respect, this study aims to investigate the suitability of using ceramic tile (CT) and ceramic sanitary (CS) w...
متن کاملEffect of Self-Compacting Concrete and Aggregate Size on Anchorage Performance at Highly Congested Reinforcement Regions
At highly congested reinforcement regions, which is common at beam-column joint area, clear spacing between parallel bars becomes less than maximum normal aggregate size (20mm) which has not been addressed in any design code and specifications. Limited clear spacing between parallel bars (herein after thin cover) is one of the causes which affect anchorage performance. In this study, an experim...
متن کاملEffectiveness of Fiber Reinforcement on the Mechanical Properties and Shrinkage Cracking of Recycled Fine Aggregate Concrete
This paper presents an experimental study conducted to investigate the effect of fiber reinforcement on the mechanical properties and shrinkage cracking of recycled fine aggregate concrete (RFAC) with two types of fiber-polyvinyl alcohol (PVA) and nylon. A small fiber volume fraction, such as 0.05% or 0.1%, in RFAC with polyvinyl alcohol or nylon fibers was used for optimum efficiency in minimu...
متن کاملIn situ strength assessment of concrete using recycled aggregates by means of small diameter cores.
By increasing the demolition of old concrete structures and the interest of civil industries to consume cheaper materials, using Recycled Concrete Aggregate (RCA) can cause environmental protection and decrease the construction costs. On the other hand, the high potential of Recycled Aggregate Concrete (RAC) in concrete industry was established by extensive experimental researches were performe...
متن کاملSeismic Performance of Composite Shear Walls Constructed Using Recycled Aggregate Concrete and Different Expandable Polystyrene Configurations
The seismic performance of recycled aggregate concrete (RAC) composite shear walls with different expandable polystyrene (EPS) configurations was investigated. Six concrete shear walls were designed and tested under cyclic loading to evaluate the effect of fine RAC in designing earthquake-resistant structures. Three of the six specimens were used to construct mid-rise walls with a shear-span ra...
متن کامل