Electro-Assisted Deposition of Calcium Phosphate on Self-Assembled Monolayers
نویسندگان
چکیده
Calcium phosphate (CaP) ceramics are used in orthopedics and dentistry due to their excellent biocompatibility and osseointegration. Here, the electro-assisted deposition of CaP on two different selfassembled monolayers (SAMs), 2-mercaptoacetic acid (MAA) and 2-mercaptoethanol (ME), was studied both at short (up to 3 min) and long (2 hours) deposition periods on well-defined evaporated gold surfaces. It was found that the end group of the monolayer has a major effect on the growth of the CaP coating. The deposition was slower and less electrically efficient on MAA SAM, but surface cracking was essentially eliminated due to reduction of the crystallographic mismatch. The carboxylic acid may facilitate CaP growth by attracting Ca ions to the surface, which could explain the higher amount of side reactions occurring at the beginning of the deposition. ã 2016 Elsevier Ltd. All rights reserved.
منابع مشابه
Effect of Decorating Titanium with Different Self-Assembled Monolayers on the Electrodeposition of Calcium Phosphate
Calcium phosphate (CaP) ceramics are used in orthopedics and dentistry due to their excellent osseointegration and biocompatibility. The electrodeposition of CaP on titanium alloy covered with self-assembled monolayers (SAMs) was studied with respect to the influence of chain length, end-group charge, and anchoring group. SAMs with end-groups similar to the functional groups on the side chains ...
متن کاملSelective atomic layer deposition of titanium oxide on patterned self-assembled monolayers formed by microcontact printing.
We demonstrate a selective atomic layer deposition of TiO2 thin films on patterned alkylsiloxane self-assembled monolayers. Microcontact printing was done to prepare patterned monolayers of the alkylsiloxane on Si substrates. The patterned monolayers define and direct the selective deposition of the TiO2 thin film using atomic layer deposition. The selective atomic layer deposition is based on ...
متن کاملChemical analyses of hydroxyapatite formation on SAM surfaces modified with COOH, NH(2), CH(3), and OH functions.
Hydroxyapatite formation was examined at the surface of self-assembled monolayers (SAMs) modified with four functional groups, -COOH, -NH(2), -CH(3), and -OH. For COOH-SAM and NH(2)-SAM, scanning electron spectroscopic observation showed that flake-like sheet crystals covered the whole wafer and small broccoli-like crystals were observed occasionally on the flake-like crystal base layer. For CH...
متن کاملSelf-Assembled Monolayers deposition in Supercritical Carbon Dioxide
Self-Assembled Monolayers of organic molecules have been successfully deposited onto wafer surface in supercritical carbon dioxide. Deposition method and apparatus are described. The layers are characterized by AFM and water droplet contact angle. Interest of this technique compared to liquid and vapor phase is discussed and studied for surface conversion from hydrophilic to hydrophobic for dif...
متن کاملΠαλμών: Εφαρμογές στα Βιοϋλικά και Βιοαισθητήρες» «Non-Linear Micro-Nanolithography With Short-Pulse Lasers: Applications on Biomaterials and Biosensors»
The present PhD thesis focuses on the development of biocompatible high-precision scaffolds with complex architectures for applications in the field of biomaterials and photonics. Self-assembled peptide fibrils were designed in order to be used as novel materials. Their positioning and integration into devices fabricated with femtosecond laser technologies, was further examined. 3D scaffolds wi...
متن کامل