Homo- and hetero-epitaxial growth of hexagonal and cubic MgxZn1−x O alloy thin films by pulsed laser deposition technique

نویسنده

  • S S Hullavarad
چکیده

In this work, we describe the homoand hetero-epitaxial growth of hexagonal and cubic MgxZn1−xO thin films on lattice matched substrates of c-Al2O3, ZnO, MgO and SrTiO3. The crystalline quality, composition and epitaxial nature of the alloy films are obtained by x-ray diffraction and Rutherford backscattering spectroscopy (RBS) techniques. The RBS channeling yields are in the range 3–8% for homoepitaxial and hetero-epitaxial thin films. The metal–semiconductor–metal and ultraviolet detectors were fabricated on hexagonal and cubic MgxZn1−xO thin films and the leakage current and UV-visible rejection ratio are correlated with the epitaxial relationship between the film and substrates. (Some figures in this article are in colour only in the electronic version)

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis, Structures, and Physical Properties of Yttrium-Doped Strontium Manganese Oxide Films

Cubic strontium manganese oxide is an end-member of the colossal magnetoresistive (CMR) family of manganese-based perovskites, Ln1-xAExMnO3. Because normal synthesis conditions lead to the 4-H hexagonal polymorph, high-pressure conditions are typically used to obtain the cubic perovskite polymorph. In this work, we describe the synthesis and structural/physical characterization of the cubic per...

متن کامل

Ferromagnetism in pseudocubic BaFeO3 epitaxial films

Growth and properties of epitaxial BaFeO3 thin films in the metastable cubic perovskite phase are examined. BaFeO3 films were grown on 012 LaAlO3 and 001 SrTiO3 single crystal substrates by pulsed-laser deposition. X-ray diffraction shows that films grown between 650 and 850 °C yield an oxygen-deficient BaFeO2.5+x pseudocubic perovskite phase that decreases in lattice spacing with increasing gr...

متن کامل

Dependence of Magnetic Properties on Laser Ablation Conditions for Epitaxial La_{0.6}Sr_{0.4}MnO_{3} Thin Films Grown by Pulsed Laser Deposition

Epitaxial La0:6Sr0:4MnO3 (LSMO) thin films were grown by pulsed laser deposition. Relationships between magnetic properties of LSMO epitaxial thin films and ablation conditions such as ablated spot area and total incident laser energy in a pulsed laser deposition technique were studied. Ablated spot area was controlled by changing the focus lens position and total laser energy. Epitaxial growth...

متن کامل

Probing on Growth and Characterizations of SnFe2O4 Epitaxial Thin Films on MgAl2O4 Substrate

*Correspondence: Ram K. Gupta, Department of Chemistry, Pittsburg State University, 1701 South Broadway, Pittsburg, KS-66762, USA e-mail: [email protected] Epitaxial tin ferrite (SnFe2O4) thin films were grown using KrF excimer (248 nm) pulsed laser deposition technique under different growth conditions. Highly epitaxial thin films were obtained at growth temperature of 650°C. The quality a...

متن کامل

Synthesis of Boron-Aluminum Nitride Thin Film by Chemical Vapour Deposition Using Gas Bubbler

Boron included aluminium nitride (B-AlN) thin films were synthesized on silicon (Si) substrates through chemical vapour deposition ( CVD ) at 773 K (500 °C). tert-buthylamine (tBuNH2) solution was used as nitrogen source and delivered through gas bubbler. B-AlN thin films were prepared on Si-100 substrates by varying gas mixture ratio of three precursors. The structural properties of the films ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007