Delay-Optimal Ordering of Wires in Interconnect Channels

نویسندگان

  • Konstantin Moiseev
  • Shmuel Wimer
  • Avinoam Kolodny
چکیده

The problem of ordering and sizing parallel wires residing in a single metal layer within an interconnect channel is addressed in this paper. Wires are ordered such that cross-capacitances between neighboring wires are optimally shared for circuit delay minimization. Using an Elmore delay model including cross capacitances, an optimal wire ordering is uniquely determined, such that average signal delay can be minimized by proper allocation of inter-wire spaces. For uniform-width wires, the optimal order depends on the size of drivers, and is independent of size of receivers. The optimal order corresponds to minimal differences between driver resistances of neighboring wires. This result applies to most practical VLSI design scenarios. The problem of simultaneously ordering and optimizing variablewidth wires is addressed also. The same ordering method is shown to be advantageous for minimizing the critical wire delay in most problem instances. Examples for 65-nanometer technology are analyzed and discussed.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

On optimal ordering of signals in parallel wire bundles

Optimal ordering and sizing of wires in a constrained-width interconnect bundle are studied in this paper. It is shown that among all possible orderings of signal wires, a monotonic order of the signals according to their effective driver resistance yields the smallest weighted average delay. Minimizing weighted average delay is a good approximation for MinMax delay optimization. Three variants...

متن کامل

On Optimal Ordering of Signals

Optimal ordering and sizing of wires in a constrained-width interconnect bundle are studied in this paper. It is shown that among all possible orderings of signal wires, a monotonic order of the signals according to their effective driver resistance yields the smallest weighted average delay. Minimizing weighted average delay is a good approximation for MinMax delay optimization. Three variants...

متن کامل

Optimising bandwidth over deep sub-micron interconnect

In deep sub-micron (DSM) circuits proper analysis of interconnect delay is very important. When relatively long wires are placed in parallel, it is essential to include the effects of cross-talk on delay. In a parallel wire structure, the exact spacing and size of the wires determine both the resistance and the distribution of the capacitance between the ground plane and the adjacent signal car...

متن کامل

Optimal Ordering Policy with Stock-Dependent Demand Rate under Permissible Delay in Payments

We develop an inventory model to determine optimal ordering policy under permissible delay in payment by considering demand rate to be stock dependent. Mathematical models are derived under two different cases: credit period being greater than or equal to cycle time for settling the account, and credit period being less than or equal to cycle time for settling the account. The results are illus...

متن کامل

Power-Optimal Ordering of Signals in Parallel Wire Bundles

A computationally efficient technique for reducing interconnect active power is presented. Power reduction is accomplished by simultaneous wire spacing and net ordering, such that crosscapacitances are optimally shared. The existence of a unique power-optimal wire order within a bundle is proven, and a closed form of this order is derived. The optimal order of wires depends only on the activity...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006