Statistical modeling for experiments with sliding levels
نویسندگان
چکیده
Design of experiment with related factors can be implemented by using the technique of sliding levels. Taguchi (1987) proposed an analysis strategy by re-centering and re-scaling the slid factors. Hamada and Wu (1995) showed via counter examples that in many cases the interactions cannot be completely eliminated by Taguchi’s strategy. They proposed an alternative method in which the slid factors are modeled by nested effects. In this work we show the inadequacy of both methods when the objective is response prediction. We propose an analysis method based on a response surface model, and demonstrate its superiority for prediction. We also study the relationships between these three modeling strategies.
منابع مشابه
Using design of experiments approach and simulated annealing algorithm for modeling and Optimization of EDM process parameters
The main objectives of this research are, therefore, to assess the effects of process parameters and to determine their optimal levels machining of Inconel 718 super alloy. gap voltage, current, time of machining and duty factor are tuning parameters considered to be study as process input parameters. Furthermore, two important process output characteristic, have been evaluated in this research...
متن کاملAn empirical study on statistical analysis and optimization of EDM process parameters for inconel 718 super alloy using D-optimal approach and genetic algorithm
Among the several non-conventional processes, electrical discharge machining (EDM) is the most widely and successfully applied for the machining of conductive parts. In this technique, the tool has no mechanical contact with the work piece and also the hardness of work piece has no effect on the machining pace. Hence, this technique could be employed to machine hard materials such as super allo...
متن کاملCombined application of computational fluid dynamics (CFD) and design of experiments (DOE) to hydrodynamic simulation of a coal classifier
Combining the computational fluid dynamics (CFD) and the design of experiments (DOE) methods, as a mixed approach in modeling was proposed so that to simultaneously benefit from the advantages of both modeling methods. The presented method was validated using a coal hydraulic classifier in an industrial scale. Effects of operating parameters including feed flow rate, solid content and baffle le...
متن کاملExperimental investigation, modeling, and optimization of combined electro-(fenton/coagulation/flotation) process: design of experiments and artificial intelligence systems
In this study, a combined electro-(Fenton/coagulation/flotation) (EF/EC/El) process was studied via degradation of Disperse Orange 25 (DO25) organic dye as a case study. Influences of seven operational parameters on the dye removal efficiency (DR%) were measured: initial pH of the solution (pH0), applied voltage between the anode and cathode (V), initial ferrous ion concentration (CFe), initial...
متن کاملDAMAGE AND PLASTICITY CONSTANTS OF CONVENTIONAL AND HIGH-STRENGTH CONCRETE PART I: STATISTICAL OPTIMIZATION USING GENETIC ALGORITHM
The constitutive relationships presented for concrete modeling are often associated with unknown material constants. These constants are in fact the connectors of mathematical models to experimental results. Experimental determination of these constants is always associated with some difficulties. Their values are usually determined through trial and error procedure, with regard to experimental...
متن کامل