An experimental investigation into localised low-velocity impact loading on glass fibre-reinforced polyamide automotive product
نویسندگان
چکیده
منابع مشابه
Low Velocity Impact Behavior of Glass Filled Fiber-Reinforced Thermoplastic Engine Components
This paper concerns automotive parts located underneath the engine and in particular the engine oil pan. Classically made of stamped steel or cast aluminum, new developments have allowed the manufacture oil pans with polyamide 66 reinforced by 35% weight of short glass fiber. However, polyamides have some limitations and the most significant is their response to localized impact loading. The na...
متن کاملFatigue Resistance of Composite Fibre-metal Laminates Subjected to Impact Loading
GLARE (GLAss REinforced) belongs to a family of fibre-metal laminates currently being used as a skin material for the upper and side shells in the forward and rear fuselage body of A380. This composite material consists of thin layers of aluminium sheets and unidirectional prepreg layers of glass fibres embedded into an epoxy based matrix. GLARE demonstrates excellent resistance to fatigue crac...
متن کاملAn experimental investigation of novel hybrid epoxy/glass fibers nanocomposite reinforced with nanoclay with enhanced properties for low velocity impact test
The application of nanoparticles in order to enhance the composites properties has been recently attracted many researchers' attentions. To increase the mechanical and physical properties of the composites, the nanoparticles have no significant effect on the weight and nanostructure of composites. One of the well-known nanoparticles is the Nanoclay (NC) that have been widely used in industries ...
متن کاملThe influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced Polyamide 6,6
Results of an investigation of the mechanical performance of injection moulded long glass-fibre reinforced polyamide 6,6 composites are presented. The glass-fibre content in these composites was varied over the range of 10-50% by weight using fibres with average diameters of 10, 14 and 17 μm. Impact testing was carried out at -40, 23 and 80°C on dry-as-moulded and boiling water conditioned samp...
متن کاملFlexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2016