Design of a Novel 3 Db Microstrip Backward Wave Coupler Using Defected Ground Structure
نویسندگان
چکیده
In this paper an edge coupled microstrip coupler with defected ground structure is presented. A normally 7 dB coupler designed on Alumina substrate is converted into a 3 dB coupler by cutting single rectangular slot in the ground plane encompassing the two transmission lines. Other properties of backward wave coupler remain the same, except for a tighter coupling. With this method of design optimization, it will be possible to fabricate a 3 dB coupler in compact form without strain in fabrication process. The structure is analyzed considering magnetic and electric coupling between the two transmission lines. Simulation based studies show reasonable agreement between analytical results and corresponding simulation results.
منابع مشابه
A Miniaturized Directional Coupler Using Complementary Split Ring Resonator and Dumbbell-Like Defected Ground Structure
A novel microstrip coupled-line directional coupler is proposed in this paper. It is based on the introduction of a complementary split ring resonator and dumbbell-like defected ground structure on the coupled lines to strongly enhance the designed backward coupling. The designed frequency band is from 1.2 to 1.5GHz. The coupler is fabricated and tested. The insertion loss is less than 3.5 dB. ...
متن کاملSize Reduction and Harmonic Suppression of Rat-race Hybrid Coupler Using Defected Microstrip Structure
In this paper, defected microstrip structure (DMS) is applied to design a compact microstrip rat-race hybrid coupler. The proposed structure introduces both harmonic signal suppression and a significant reduction of size because half of the ring is embedded in upper section. By embedding the DMS, it is observed that the third harmonic signal is suppressed to −25 dB with respect to a conventiona...
متن کاملMutual Coupling Reduction Using Dumbbell Defected Ground Structure for Multiband Microstrip Antenna Array
A novel design of multiband microstrip antenna array with dumbbell shape defected ground structure (DGS) is presented. The DGS is inserted into the ground plane between the two elements of the antenna array in order to suppress mutual coupling. Both simulation and measurement results verified that the DGS improved the radiation properties of the antenna array. Measurement results of the DGS ant...
متن کاملDesign of Compact Multi-Channel Diplexer Using Defected Microstrip Structure
In this paper, two compact quad-channel and six-channel diplexer are designed and fabricated using defected microstrip structure (DMS). This structure is designed for the desired frequency based on the literature reviews. The proposed configuration is composed of a conventional T-junction divider with two pairs of open bended stubs and dual/tri-band filters. In designing dual band filters, a lo...
متن کاملDevelopment of Forward-wave Directional Couplers Loaded by Periodic Shunt Shorted Stubs
In this paper a new procedure for designing forward-wave directional couplers using periodic shunt short circuited stubs is proposed. A new type of cell using these stubs, which enlarge the phase difference between even- and odd modes of a uniform microstrip coupled line is introduced. Using the equivalent circuit model for even- and odd-modes of the proposed cell, the elements of the ABCD tra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2006