Retention force assessment in conical crowns in different material combinations.

The puprose of this study was to evaluate retention force of conical double crowns in two material connections: gold casting alloy/gold casting alloy and gold casting alloy/gold electroforming alloy. 12 crown pairs of both material connections with the cone angles of 2°, 4° and 6° were made. Experiment of 10.000 in-and-out cycles was performed using a new device which allows the retentive force to be measured in continuous way without necessity of moving the samples to another device. It has been found that the higher the retentive force values, the lower the cone angle. Dispersion of the retention value was similar in both groups, but when cone angle was 2° or 4°, stability of retention force with the passage of time was higher in combinations with electroformed copings. The optimum solution was the cast alloy/cast alloy connection but only with cone angle 6°. However, retentive values seem to be too low to achieve proper retention of dentures.