Anodic formation of high aspect ratio, self-ordered Nb2O5 nanotubes.
نویسندگان
چکیده
In the present work, we demonstrate the feasibility to form an aligned Nb(2)O(5) nanotube layer by self-organizing anodization of Nb in a NH(4)F-glycerol electrolyte. In order to achieve a nanotubular rather than a nanoporous layer, careful optimization of the anodization electrolyte is required. We show that only in a narrow window of electrolyte parameters highly aligned nanotubes of 50 nm inner diameter and several micrometres in length can be formed.
منابع مشابه
Distinguishing nanowire and nanotube formation by the deposition current transients
High aspect ratio Ni nanowires (NWs) and nanotubes (NTs) were electrodeposited inside ordered arrays of self-assembled pores (approximately 50 nm in diameter and approximately 50 μm in length) in anodic alumina templates by a potentiostatic method. The current transients monitored during each process allowed us to distinguish between NW and NT formation. The depositions were long enough for the...
متن کاملAtomic layer deposition of ZnS nanotubes.
We report on the growth of high-aspect-ratio (approximately > 300) zinc sulfide nanotubes with variable, precisely tunable, wall thicknesses and tube diameters into highly ordered pores of anodic alumina templates by atomic layer deposition (ALD) at temperatures as low as 75 degrees C. Various characterization techniques are employed to gain information on the composition, morphology and crysta...
متن کاملFabrication of open-ended high aspect-ratio anodic TiO2 nanotube films for photocatalytic and photoelectrocatalytic applications.
A facile process is introduced to flake high aspect-ratio anodic TiO(2) nanotube (TiNT) arrays off Ti substrates and then chemically remove the bottom caps to obtain open-ended TiNT films that exhibit high activity to photocatalytic degradation of methylene blue and efficient hydrogen production from photoelectrocatalytic water splitting.
متن کاملOptimization of carbon nanotube synthesis from porous anodic Alâ•fiFeâ•fiAl templates
A parametric study of carbon nanotube (CNT) synthesis from catalytically active porous anodic Al–Fe–Al multilayer templates was conducted with respect to pore aspect ratio, Fe layer thickness, CNT synthesis temperature, and pre-anodization thermal annealing. Performance metrics included CNT catalytic activity and the pore wall integrity at the Al–Fe–Al interface. The observed CNT density was a ...
متن کاملSub-100-nm ordered silicon hole arrays by metal-assisted chemical etching
Sub-100-nm silicon nanohole arrays were fabricated by a combination of the site-selective electroless deposition of noble metals through anodic porous alumina and the subsequent metal-assisted chemical etching. Under optimum conditions, the formation of deep straight holes with an ordered periodicity (e.g., 100 nm interval, 40 nm diameter, and high aspect ratio of 50) was successfully achieved....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Chemical communications
دوره 48 35 شماره
صفحات -
تاریخ انتشار 2012