Characterizing the boundary lateral to the shear direction of deformation twins in magnesium
نویسندگان
چکیده
The three-dimensional nature of twins, especially the atomic structures and motion mechanisms of the boundary lateral to the shear direction of the twin, has never been characterized at the atomic level, because such boundary is, in principle, crystallographically unobservable. We thus refer to it here as the dark side of the twin. Here, using high-resolution transmission electron microscopy and atomistic simulations, we characterize the dark side of deformation twins in magnesium. It is found that the dark side is serrated and comprised of coherent twin boundaries and semi-coherent twist prismatic-prismatic boundaries that control twin growth. The conclusions of this work apply to the same twin mode in other hexagonal close-packed materials, and the conceptual ideas discussed here should hold for all twin modes in crystalline materials.
منابع مشابه
Free Vibration Analysis of FGM Cylindrical Shell with Supported Ring Based on Reddy Model under Clamped Boundary Condition
In this paper a study on the vibration of thin cylindrical shells with ring supports and made of functionally graded materials (FGMs) composed of stainless steel and nickel is presented. The properties are graded in the thickness direction according to a volume fraction power-law distribution.The cylindrical shells with ring supports which are arbitrarily placed along the shell and impose zero ...
متن کاملSuperplasticity of a fine-grained Mg–1.5 wt% Gd alloy after severe plastic deformation
The strain rate sensitivity (SRS) of Mg–1.5 wt% Gd processed by conventional extrusion and 2 passes of simple shear extrusion (SSE) was investigated by shear punch testing. Shear punch tests were conducted at initial shear strain rates in the range of 0.003–0.3 s-1 and at temperatures in the range of 573–773 K. A fine-grained microstructure with an average grain size of about 2.5 µm, obtained a...
متن کاملThermoelastic Analysis of a Functionally Graded Simple Blade Using First-Order Shear Deformation Theory
In this article, the thermo-elastic behavior of a functionally graded simple blade subjected to the mechanical and thermal loadings is presented, applying a semi-analytical method and a variable thickness cantilever beam model. A specific temperature gradient is employed between the root and the edges of the beam. It is assumed that the mechanical and thermal properties are longitudinal directi...
متن کاملتحلیل ساختاری، خاستگاه و شرایط دگرشکلی زونهای برشی شکلپذیر در تودهی گرانیتوئیدی ده نو- غرب مشهد
The Mashhad ophiolitic and metamorphic complex was intruded by Mashhad granitoids during different episodes of magmatisms. Dehnow pluton with diorite-granodiorite composition was intruded at earliest stage of magmatism during Late Triassic (Norian, 215± 4My). This pluton is cut by the NW-SE trending ductile shear zones which are dominated by an intense ductile deformation. The rocks of Dehnow p...
متن کاملFree Vibration Analysis of Size-Dependent, Functionally Graded, Rectangular Nano/Micro-plates based on Modified Nonlinear Couple Stress Shear Deformation Plate Theories
In the present study, a vibration analysis of functionally graded rectangular nano-/microplates was considered based on modified nonlinear coupled stress exponential and trigonometric shear deformation plate theories. Modified coupled stress theory is a non-classical continuum mechanics theory. In this theory, a material-length scale parameter is applied to account for the effect of nanostructu...
متن کامل