Two-phase synthesis of colloidal annular-shaped Ce(x)La(1-x)CO3OH nanoarchitectures assembled from small particles and their thermal conversion to derived mixed oxides.

Undoped and cerium doped LaCO(3)OH annular-shaped nanoarchitectures with high specific surface area have been fabricated via the thermolysis of Ce(x)La(1-x)(oleate)(3) (x = 0-20 mol %) complexes in a toluene-water system containing tert-butylamine/oleylamine. The products exhibit 400 nm-sized monodisperse annular-shaped nanoarchitectures, which are constituted of 3-5 nm-sized primary particles. A possible mechanism of the reaction of Ce(x)La(1-x)(oleate)(3) and tert-butylamine for the formation of annular-shaped Ce(x)La(1-x)CO(3)OH nanoarchitectures is proposed. The thermal conversion of Ce(x)La(1-x)CO(3)OH to Ce(x)La(1-x)(CO(3))O(2) at 600 °C, to Ce(x)La(1-x)(OH)(3) at 800 °C, final to (Ce(x)La(1-x))(2)O(3-δ) at 900 °C were employed, while the original morphology was essentially unchanged. The dopant concentration was varied from 5 to 20 of cerium ions per LaCO(3)OH nanoparticle. The X-ray diffraction (XRD) results reveal that the cerium dopant could enter easily into the LaCO(3)OH structural lattice, whereas copper could unlikely enter into their lattice because of their large ionic radius difference. The cerium oxidation state was controlled by changing doping concentration. The X-ray photoelectron spectroscopy (XPS) results reveal that only one Ce(3+) oxidation state is in the as-synthesized Ce(x)La(1-x)CO(3)OH samples with cerium concentration ranging from 5 to 20 mol %, whereas both 3+ and 4+ ones coexisted in 20 mol % Ce:LaCO(3)OH structure. Remarkable luminescence emission intensity enhancement of 1.5-9.0 times were observed for Ce(x)La(1-x)CO(3)OH samples with cerium concentration ranging from 5 to 20 mol %, after doping with an undoped LaCO(3)OH.