General Overview of Continuum Mechanics
نویسندگان
چکیده
1. Preliminary concepts: Definitions and theoretical framework 2. Kinematics of deformation 2.1. The continuum setting: Mathematical description 2.2. Displacement, deformation and motion 2.3. Stretch, shear and strain 2.4. Change of reference frame and objective tensors 3. Balance laws 3.1. Mass and conservation of mass 3.2. Force, torque and theory of stress 3.3. Euler’s laws of motion 3.4. Energy 3.5. Summary of equations and unknowns 4. Constitutive behavior 4.1. Basic concepts of constitutive theories 4.2. Isothermal Solid Mechanics 4.3. Isothermal Fluid Mechanics Glossary Bibliography Biographical Sketches
منابع مشابه
Progressive Damage Analysis of Laminated Composites using Continuum Damage Mechanics
In this paper, progressive damage and global failure of composite laminates under quasi-static, monotonic loading are investigated using 3D continuum damage mechanics. For this purpose, a finite element program has been developed using an eight-node 2D layered element including layer-wise plate theory. Damage analysis of a single orthotropic layer under various uniform in-plane and transverse l...
متن کاملSpringback Modeling in L-bending Process Using Continuum Damage Mechanics Concept
Springback is one of the most common and important issues in metal forming area. Due to the fact that springback depends on a variety of parameters, it is hard to predict. Hence, in this paper, the effect of continuum damage mechanics (CDM) on springback was investigated based on the Lemaitre isotropic unified damage law. Swift’s hardening law was employed to describe isotropic hardening behavi...
متن کاملEvaluation of continuum damage at different temperatures for aluminum-silicon alloy of engine piston within low-cycle fatigue regime
In this article, the isothermal low-cycle fatigue continuum damage in the engine piston aluminum alloy has been evaluated at different temperatures. For this objective, experimental data of low-cycle fatigue tests on standard specimens were used at 280, 350 and 425°C. Based on the continuum damage mechanics method, the fatigue damage was calculated during cyclic loading. Obtained results, inclu...
متن کاملA damage model incorporating dynamic plastic yield surface
In this paper, a general elastoplastic-damage constitutive model considering the effect of strain rate has been developed. The derivation of this model has been cast into the irreversible thermodynamics with internal variables within the fundamentals of Continuum Damage Mechanics (CDM). The rate effect has been involved as an additional term into the plastic yield surface (dynamic plastic yield...
متن کاملStress Transfer Modeling in CNT Reinforced Composites using Continuum Mechanics (TECHNICAL NOTE)
Because of the substantial difference in stiffness between matrix and nanotube in CNT composite, the stress transfer between them controls their mechanical properties. This paper investigates the said issue, analytically and numerically, in axial load using representative volume element (RVE). The analytical model was established based on the modified Cox’s shear lag model with the use of some ...
متن کاملThermal vibration analysis of double-layer graphene embedded in elastic medium based on nonlocal continuum mechanics
This paper presents the thermal vibration analysis of double-layer graphene sheet embedded in polymer elastic medium, using the plate theory and nonlocal continuum mechanics for small scale effects. The graphene is modeled based on continuum plate theory and the axial stress caused by the thermal effects is also considered. Nonlocal governing equations of motion for this double-layer graphene s...
متن کامل