FIB failure analysis of memory arrays
نویسندگان
چکیده
Many modern microelectronic chips contain embedded memory arrays. A typical memory bit-cell contains several transistors. Failure of a single transistor or contact within a bit cell makes the entire bit cell inoperable. A dual-beam Focused Ion Beam (FIB) tool combines milling capability with in situ Scanning Electron Microscope (SEM) imaging, which is very useful for identifying the root cause when a physical defect is present. This paper describes the slice-andview FIB technique for failure analysis (FA) in memory arrays. Several failure mechanisms have been identified, including missing patterns, killer particle defects, shorted and open stack vias. Transmission Electron Microscopy (TEM)/ Scanning TEM (STEM) analysis was able to provide additional information when SEM resolution was not sufficient. Processes were adjusted appropriately leading to yield enhancement. 2004 Elsevier B.V. All rights reserved.
منابع مشابه
Application of FIB/SEM and TEM to Bit Failure Analyses in SRAM Arrays
Many microelectronic chips contain embedded memory arrays. A single SRAM bit-cell contains several transistors. Failure of any of the transistors makes the entire bit-cell inoperable. Dual-beam Focused Ion Beam (FIB) combines the slicing capability of FIB with in-situ SEM imaging. The combination offers unparalleled precision in looking for root causes of failures in microelectronic devices. On...
متن کاملCharacterization and Failure Analysis of 3D Integrated Systems using a novel plasma-FIB system
Today 3D integration based on TSV’s is a well accepted approach to further improve Integrated Circuits in terms of miniaturization, performance, power consumption and heterogeneous integration [1]. However, 3D integration comes with the introduction of many new processes and materials that may affect behavior and reliability of the overall system [2]. Therefore, there is a strong demand for phy...
متن کاملAdvanced electrical analysis of embedded memory cells using atomic force probing
To identify the failure cause of embedded memory cells e.g. SRAM with 6 transistors it is often necessary to measure the electrical parameters of each transistor. Until now, on integrated circuits with small feature size and pitch, this was only possible using FIB probing pads or SEM probers, but both methods are complex and error-prone. Today Atomic Force Probing (AFP) provides a powerful alte...
متن کاملCreation of Controlled Defects Inside Colloidal Crystal Arrays with a Focused Ion Beam
In this work the reliability of the focused-ion-beam (FIB) patterning on polystyrene (PS) colloidal crystals at different scales is determined. Ordered arrays of PS spheres (465 nm) are successfully modified by selectively removing a single sphere. The water-vapor assisted FIB milling is crucial to obtain this result. Furthermore, isolated PS spheres are FIB drilled with or without chemically e...
متن کاملHigh Speed TEM Sample Preparation by Xe FIB
Preparation of Transmission Electron Microscope (TEM) samples by Focused Ion Beam (FIB) milling is one of the most precise techniques now routinely used for example in failure analysis or material science. These TEM samples are commonly prepared using Ga FIB technology, starting more than 20 years ago [13]. Presently FIB columns are commonly combined with the Scanning Electron Microscopy (SEM) ...
متن کامل