An Analysis of New and Existing FDTD Methods for Isotropic Cold Plasma and a Method for Improving Th - Antennas and Propagation, IEEE Transactions on

نویسنده

  • Steven A. Cummer
چکیده

Over the past few years, a number of different finite-difference time-domain (FDTD) methods for modeling electromagnetic propagation in an isotropic cold plasma have been published. We have analyzed the accuracy and stability of these methods to determine which method provides the greatest accuracy for a given computation time. For completeness, two new FDTD methods for cold plasma, one of which is based on the concept of exponential fitting, are introduced and evaluated along with the existing methods. We also introduce the concept of cutoff modification which can be easily applied to most of the FDTD methods, and which we show can improve the accuracy of these methods with no additional computational cost. Von Neumann’s stability analysis is used to evaluate the stability of the various methods, and their accuracy is determined from a straightforward time-and-space harmonic analysis of the dispersion and dissipation errors. Results of numerical experiments to verify the accuracy analysis are presented. It is found that for lowloss plasma, the PLRC method [4] is the most accurate, but the method of Young [1] can use less memory and is nearly as accurate. In this low-loss plasma regime, cutoff modification can significantly reduce the error near cutoff at the expense of slightly greater error at lower frequencies. For strongly collisional plasmas, the PLRC method also provides the most accurate solution.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A Study of Electromagnetic Radiation from Monopole Antennas on Spherical-Lossy Earth Using the Finite-Difference Time-Domain Method

Radiation from monopole antennas on spherical-lossy earth is analyzed by the finitedifference time-domain (FDTD) method in spherical coordinates. A novel generalized perfectly matched layer (PML) has been developed for the truncation of the lossy soil. For having an accurate modeling with less memory requirements, an efficient "non-uniform" mesh generation scheme is used. Also in each time step...

متن کامل

FDTD Analysis of Top-Hat Monopole Antennas Loaded with Radially Layered Dielectric

Top-hat monopole antennas loaded with radially layered dielectric are analyzed using the finite-difference time-domain (FDTD) method. Unlike the mode-matching method (MMM) (which was previously used for analyzing these antennas) the FDTD method enables us to study such structures accurately and easily. Using this method, results can be obtained in a wide frequency band by performing only one ti...

متن کامل

کاربرد روش معادله سهموی در تحلیل مسائل انتشار امواج داخل ساختمان

With the rapid growth of indoor wireless communication systems, the need to accurately model radio wave propagation inside the building environments has increased. Many site-specific methods have been proposed for modeling indoor radio channels. Among these methods, the ray tracing algorithm and the finite-difference time domain (FDTD) method are the most popular ones. The ray tracing approach ...

متن کامل

An efficient finite difference time domain algorithm for band structure calculations of Phononic crystal

In this paper, a new algorithm for studying elastic wave propagation in the phononic crystals is presented. At first, the displacement-based forms of elastic wave equations are derived and then the forms are discretized using finite difference method. So the new algorithm is called the displacement-based finite difference time domain (DBFDTD). Three numerical examples are computed with this met...

متن کامل

Analytical Solution for a Two-Layer Transversely Isotropic Half-Space Affected by an Arbitrary Shape Dynamic Surface Load

The dynamic response of a transversely isotropic, linearly elastic layer bonded to the surface of a half-space of a different transversely isotropic material under arbitrary shape surface loads is considered. With the help of displacements and stresses Green’s functions, an analytical formulation is presented for the determination of the displacements and stresses at any point in both surface l...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 1998