Comparing the performance of the common rail fuel injection system with the traditional injection system using computer aided modelling and simulation
نویسنده
چکیده
__________________________________________________________________________________________________ Author’s Biography O. Bunes is MSc (1996) from the Department of Marine Technology, NTNU. He is employed as Research Engineer, Division of Machinery and Technical Operations at MARINTEK, an independent research and development company in Trondheim, Norway. Mr Bunes has been working with modelling and simulation of various systems and components since 1997.
منابع مشابه
Numerical and experimental investigation of common rail fuel injection system and evaluating influence of fuel pressure on injection characteristics and pressure fluctuations
The combustion processes, engine performance, fuel consumption, exhaust-gas composition, and combustion noise in the diesel engine are closely linked to appropriate mixture of air-fuel in combustion chamber. The fuel-injection parameters such as injection start point, discharge rate curve, injection time and injection pressure are defined by the quality of the mixture formation. The numerical m...
متن کاملNumerical investigation the effect of accumulator on reducing the pressure waves in a common rail fuel injection system of diesel engine
Pressure fluctuations during fuel injection are one of the factors that negative effect on performance of diesel engine. These fluctuations are caused by the rapid opening and closing of the nozzles and the creation of pressure waves in the fuel rail. One way to control these pressure fluctuations is to change the injector design and use an accumulator in the injector. This study is performed t...
متن کاملReduction of emissions and fuel consumption of diesel engine by using common rail fuel injection and aftertreatment systems
In this experimental study, the fuel system of the OM364 diesel engine manufactured by IDEM company, which operates in the basic mode with inline fuel pump and mechanical governor control, is upgraded to a common rail system with electronic control by the ECU. Also, emmssion of exhaust gases is reduced by SCR and DOC catalysts then performance and emmission parameters of engine are compared i...
متن کاملEffect of fuel injection discharge curve and injection pressure on upgrading power and combustion parameters in HD diesel engine with CFD simulation
Abstract: In this study, the effect of fuel injection discharge curve and injection pressure simultaneously for upgrading power of heavy duty diesel engine by simulation of combustion process in AVL-Fire software are discussed. Hence, the fuel injection discharge curve was changed from semi-triangular to rectangular which is usual in common rail fuel injection system. Injection pressure with r...
متن کاملA High Performance Feedback Active Noise Control System
In many active noise control (ANC) applications, an online secondary path modelling method that uses a white noise as a training signal is required. This paper proposes a new feedback ANC system. Here we modified both the FxLMS and the VSS-LMS algorithms to raised noise attenuation and modelling accuracy for the overall system. The proposed algorithm stops injection of the white noise at the op...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2003