Practical Sway Motion Control for Double Pendulum-type Overhead Crane System
نویسندگان
چکیده
The sway motion of crane can be successfully suppressed by properly shaping the reference command. Input shaping is a one type of feed-forward shaping method that is based on linear superposition. In this paper, we present the impact of double pendulum type overhead crane (DPTOC) system on the effectiveness of input shaping. An unshaped bang-bang input force is used to determine the characteristic parameters of the system for design and evaluation of the input shaping control techniques. The input shapers with the derivative effects are designed based on the properties of the system. The response DPTOC system to shaped input is experimentally verified in time and frequency domain. The performance of the input shaper is examined in terms of sway angle reduction and time response specification. Experimental results demonstrate the effectiveness of the proposed approach in reducing the sway motion of crane system.
منابع مشابه
Single Input Fuzzy Controller with Command Shaping Schemes for Double-pendulum-type Overhead Crane
This paper presents investigations into the development of composite control schemes for trajectory tracking and antisway control of a double-pendulum-type overhead crane (DPTOC) system. A nonlinear DPTOC system is considered and the dynamic model of the system is derived using the Euler-Lagrange formulation. The proposed method, known as the Single Input Fuzzy Logic Controller (SIFLC), reduces...
متن کاملOn the Adaptive Tracking Control of 3-D Overhead Crane Systems
For low cost, easy assembly and less maintenance, overhead crane systems have been widely used for material transportation in many industrial applications. Due to the requirements of high positioning accuracy, small swing angle, short transportation time, and high safety, both motion and stabilization control for an overhead crane system becomes an interesting issue in the field of control tech...
متن کاملSway Control Technology and Its Application for Overhead Traveling Cranes
cranes and gantry cranes occupy a crucial role within industry. They are used throughout the world in thousands of factories, steel mills, foundries, ship yards, warehouses, nuclear power plants, waste recycling facilities and other industrial complexes. In many manufacturing operations, operator controlled cranes account for as much as 20% of the production cycle. Material handling engineers h...
متن کاملMA3-6 : Reduction of Double-Pendulum Bridge Crane Oscillations
The natural sway of crane payloads is detrimental to safe and efficient operation. Under certain conditions, the problem is complicated when the payloads create a double-pendulum effect. Most crane control research to date has focused on single-mode dynamics. For example, several researchers have shown that signal-mode oscillations can be greatly reduced by properly shaping the inputs to the cr...
متن کاملTechniques For Sway Control Of A Double-Pendulum-Type Overhead Crane
This paper presents investigations into the development of input shaping techniques for swaying control of a doublependulum-type overhead crane (DPTOC) system. A nonlinear DPTOC system is considered and the dynamic model of the system is derived using the Euler-Lagrange formulation. An unshaped bang-bang input force is used to determine the characteristic parameters of the system for design and...
متن کامل