Electronbeam controlled radio frequency discharges for plasma processing
نویسندگان
چکیده
Related Articles Atomic-scale silicon etching control using pulsed Cl2 plasma J. Vac. Sci. Technol. B 31, 011201 (2013) Low-pressure inductively coupled plasma etching of benzocyclobutene with SF6/O2 plasma chemistry J. Vac. Sci. Technol. B 30, 06FF06 (2012) Reaction mechanisms of oxygen plasma interaction with organosilicate low-k materials containing organic crosslinking groups J. Vac. Sci. Technol. A 30, 061302 (2012) Inductively coupled plasma deep etching of InP/InGaAsP in Cl2/CH4/H2 based chemistries with the electrode at 20°C J. Vac. Sci. Technol. B 30, 051208 (2012) Angular dependences of SiO2 etch rates in C4F6/O2/Ar and C4F6/CH2F2/O2/Ar plasmas J. Vac. Sci. Technol. A 30, 051301 (2012)
منابع مشابه
Electrical characterization of radio frequency discharges
Two electrical techniques that are frequently used to characterize radio frequency plasmas are described: current–voltage probes for plasma power input and compensated Langmuir probes for electron energy probability functions and other parameters. The following examples of the use of these techniques, sometimes in conjunction with other diagnostic methods, are presented: plasma source standardi...
متن کاملHelicons—The Past Decade
First observed in gaseous plasmas in the early 1960’s, helicon discharges lay like a sleeping giant until they emerged in the 1980’s, when their usefulness as efficient plasma sources for processing microelectronic circuits for the burgeoning semiconductor industry became recognized. Research on helicons spread to many countries; new, challenging, unexpected problems arose, and these have spawn...
متن کاملThe Gaseous Electronics Conference radio-frequency reference cell: A defined parallel-plate radio-frequency system for experimental and theoretical studies of plasma-processing discharges
A “reference cell” for generating radio-frequency (rf) glow discharges in gases at a frequency of 13.56 MHz is described. The reference cell provides an experimental platform for comparing plasma measurements carried out in a common reactor geometry by different experimental groups, thereby enhancing the transfer of knowledge and insight gained in rf discharge studies. The results of performing...
متن کاملConsequences of three-dimensional physical and electromagnetic structures on dust particle trapping in high plasma density material processing discharges
Plasma processing discharges are typically designed with the goal of having uniform reactant fluxes to the substrate and a minimum of dust particle contamination of the wafer. It is not uncommon, however, that reactors have three-dimensional ~3D! structures such as antennas ~or coils!, gas injection nozzles, subor super-wafer topography and single-sided pump ports. These structures can contribu...
متن کاملEffect of power modulation on properties of pulsed capacitively coupled radiofrequency discharges
We describe measurements of plasma properties of pulsed, low pressure, capacitively coupled discharges operated in argon. The research aims to determine the effect of modulating the radiofrequency power during the discharge part of the pulse cycle. Measurements of local electron density and optical emission were made in capacitively-coupled rf discharges generated in a Gaseous Electronics Confe...
متن کامل