Selection of Optimal Measuring Points Using Genetic Algorithm in the Process to Calibrate Robot Kinematic Parameters
نویسنده
چکیده
At present state, almost the industrial robot tasks are performed by the teaching playback method, in which the robot repeats positioning its joint angles, which are taught manually in advance using a teaching pendant, etc. This method is based on comparatively high repeatability of a robot arm. The problem here is that the laborious and time-consuming online manual teaching is inevitable whenever the specification of the product is changed. It is desirable to teach the task easily and quickly to the robot manipulator when the production line and the production goods are changed.
منابع مشابه
Path Planning of a 3 DOF Servo-Hydraulic Mechanism Using Genetic Algorithm
The objective of this paper is path planning of a 3 DOF planer robot with hydraulic actuator using genetic algorithm. First the geometric and kinematic parameters of robot were established. The equations of motion are derived by Lagrange method. We proposed the model for proportional valve and hydraulic actuators. Then using the genetic algorithm we minimized the hydraulic energy consumption as...
متن کاملOptimal Trajectory Generation for a Robotic Worm via Parameterization by B-Spline Curves
In this paper we intend to generate some set of optimal trajectories according to the number of control points has been applied for parameterizing those using B-spline curves. The trajectories are used to generate an optimal locomotion gait in a crawling worm-like robot. Due to gait design considerations it is desired to minimize the required torques in a cycle of gait. Similar to caterpillars,...
متن کاملStudy of Evolutionary and Swarm Intelligent Techniques for Soccer Robot Path Planning
Finding an optimal path for a robot in a soccer field involves different parameters such as the positions of the robot, positions of the obstacles, etc. Due to simplicity and smoothness of Ferguson Spline, it has been employed for path planning between arbitrary points on the field in many research teams. In order to optimize the parameters of Ferguson Spline some evolutionary or intelligent al...
متن کاملEstimation and Calibration of Robot Link Parameters with Intelligent Techniques
Abstract: Using robot manipulators for high accuracy applications require precise value of the kinematics parameters. Since measurement of kinematics parameters are usually associated with errors and accurate measurement of them is an expensive task, automatic calibration of robot link parameters makes the task of kinematics parameters determination much easier. In this paper a simple and easy ...
متن کاملOptimal Trajectory Generation for Energy Consumption Minimization and Moving Obstacle Avoidance of SURENA III Robot’s Arm
In this paper, trajectory generation for the 4 DOF arm of SURENA III humanoid robot with the purpose of optimizing energy and avoiding a moving obstacle is presented. For this purpose, first, kinematic equations for a seven DOF manipulator are derived. Then, using the Lagrange method, an explicit dynamics model for the arm is developed. In the next step, in order to generate the desired traject...
متن کامل