Organization of microscale objects using a microfabricated optical fiber.

نویسندگان

  • S K Mohanty
  • K S Mohanty
  • M W Berns
چکیده

We demonstrate the use of a single fiber-optic axicon device for organization of microscopic objects using longitudinal optical binding. Further, by manipulating the shape of the fiber tip, part of the emanating light was made to undergo total internal reflection in the conical tip region, enabling near-field trapping. Near-field trapping resulted in trapping and self-organization of long chains of particles along azimuthal directions (in contrast to the axial direction, observed in the case of large tip cone angle far-field trapping).

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

On-chip Optofluidic Ring Resonator Sensor for Micro-scale Gas Chromatography

The design, fabrication and preliminary performance assessment of a new vapor sensor comprising a microfabricated optofluidic ring resonator (μOFRR) and its application to microscale gas chromatographic (μGC) detection of volatile organic compounds (VOC) are presented. The μOFRR combines vapor sensing and fluidic transport functions in a micro-fabricated whispering gallery mode (WGM) resonator....

متن کامل

Fabrication and Characterization of the Fiber Optical Taper for a Surface Plasmon Resonance Sensor

For a fiber optical surface plasmon resonance (SPR) sensor a short part of its cladding should be removed to coat a thin layer of a metal. Usually this is problematic when an optical fiber with small core diameter is used. In this paper, a new method using µliter droplet of the HF acid for short fiber optical taper fabrication is reported. Using this method in a multi-mode optical fiber w...

متن کامل

Weight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE)

The use of different optical-fiber sensors for weighing measurements is Abstract described. By using three different mechanical stressing mechanisms, the operation of the fiber-to-fiber transducer systems are tested and the results are presented. Parameters such as sensitivity, hysteresis, resolution, and dynamic range are measured. A comparison of the results has shown that the sensor system m...

متن کامل

Electrokinetic and optical control of bacterial microrobots

One of the great challenges in microscale science and engineering is the independent manipulation of cells and man-made objects on the micron scale. For such work, motile microorganisms are integrated with engineered systems to construct microbiorobots (MBRs). MBRs are negative photosensitive epoxy (SU-8) microfabricated structures with typical feature sizes ranging from 1 to 100 μm coated with...

متن کامل

Design and Application of a Photoacoustic Sensor for Monitoring the Laser Generated Stress Waves in Optical Fiber

Measurement of stress transients generated by a 400ns pulsed HF laser in an infrared fluoride glass fiber has been made using fast time – response piezoelectric film transducer. Acoustic signals up to 12 mV with frequencies ranging in megahertz generated by 21 mJ laser pulse when passed through the fiber axis in the linear region. It is shown that useful information such as onset of non - linea...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Optics letters

دوره 33 18  شماره 

صفحات  -

تاریخ انتشار 2008