The Effect of Tool Geometry on Rubbing and Ploughing Phenomena in Nano Abrasive Machining
نویسنده
چکیده
The effects of cutting edge shapes on the phenomena of rubbing and ploughing in nano-abrasive machining were investigated. The shapes under investigation include flat, spherical and trapezoidal shapes. The tool with the flat end geometry shows a fast initiation of ploughing, because it has the largest surface area to engage more atoms. It doesn’t show rubbing phenomenon at the (initial) depth of cut of 0.5 Angstroms. The tool with the trapezoidal end has the lowest average cutting force and the tool with the flat end has the highest average cutting force.
منابع مشابه
The Effect of the Variation of Tool End Geometry on Material Removal Mechanisms in Nanomachining
The selection of effective and optimal machining parameters is a major challenge for the manufacturing industries. The tool-work interactions may be affected by many process parameters including depth of cut, cutting speed, feed rate, cutting tool geometry et cetera. Proper selection of these parameters is critical in material removal processes. The effect of different geometric end shapes on t...
متن کاملCheck Tic-coated Tungsten Carbide Tool Wear in Machining Steel
In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...
متن کاملOptimum Swept Angle Estimation based on the Specific Cutting Energy in Milling AISI 1045 Steel Alloy
Mechanical machining processes are common manufacturing strategies to re-shape materials to desired specification. The mechanistic approach has revealed the mechanics of the machining processes with various parameters determined. The aim of this work is to investigate the impact of swept angle optimization and their influence on the specific cutting energy in milling AISI 1045 steel alloy. This...
متن کاملThe Effect of Interatomic Potentials on Nanometric Abrasive Machining
One of the major tasks in a Molecular Dynamics (MD) simulation is the selection of adequate potential functions, and if the potentials don’t model the behaviour of the atoms correctly, the results produced from the simulation would be useless. Three popular potentials namely; EmbeddedAtom Potential (EAM), Morse and the Lennand-Jones, were employed to model copper workpiece and diamond tool in n...
متن کاملIntelligent Knowledge Based System Approach for Optimization of Design and Manufacturing for Abrasive Water Jet Machining
A water jet machining is an industrial tool capable of cutting a wide variety of materials using a very high-pressure jet of water, or a mixture of water and an abrasive substance. This paper addresses the concept of the Intelligent knowledge base system (IKBS) for optimization of product design and manufacturing process for water jet machining in computer based concurrent engineering environme...
متن کامل