Commissioning of the magnetic diagnostics during the first operation phase at Wendelstein 7-X
نویسندگان
چکیده
during the first operation phase at Wendelstein 7-X K. Rahbarnia1, T. Andreeva1, A. Cardella2, B.B. Carvalho3, M. Endler1, D. Hathiramani1, J. Geiger1, O. Grulke1, S. Lazerson4, U. Neuner1, J. Svensson1, H. Thomsen1, A. Werner1 and Wendelstein 7-X Team 1 Max-Planck Institute for Plasma Physics, Wendelsteinstr. 1, 17489 Greifswald, Germany 2 Fusion for Energy, Boltzmannstr. 2, 85748 Garching, Germany 3 Instituto de Plasmas e Fusao Nuclear Instituto Superior Tecnico, 1049-001 Lisbon, Portugal 4 Princeton Plasma Physics Laboratory, Princeton, NJ 08540, USA
منابع مشابه
The Set of Diagnostics for the First Operation Campaign of the Wendelstein 7-X Stellarator
Wendelstein 7-X (W7-X) is a large optimized stellarator (B=2.5T, V=30m) aiming at demonstrating the reactor relevance of the optimized stellarators. In summer this year (2015) W7-X will begin its first operation phase (OP1.1) with five inertially cooled inboard limiters made of graphite. Assuming the heat loads can be spread out evenly between the limiters, 1 second discharges at 2 MW of heatin...
متن کاملDiagnostics development for quasi-steady-state operation of the Wendelstein 7-X stellarator (invited).
The critical issues in the development of diagnostics, which need to work robust and reliable under quasi-steady state conditions for the discharge durations of 30 min and which cannot be maintained throughout the one week duration of each operation phase of the Wendelstein 7-X stellarator, are being discussed.
متن کاملA hybrid fluid–kinetic approach for 3D plasma edge transport in He-plasma at Wendelstein 7-X
Introduction The complex three-dimensional structure of the optimised stellarator Wendelstein 7-X can only partially be accessed by means of experimental measurements, as a consequence of the only quite limited number of measurements at distinct locations with different plasma crosssections and properties. This highlights the importance of precise modelling (i.e. numerical bookkeeping) as an ex...
متن کاملWall Conditioning by ECRH and GDC at the Wendelstein 7-X Stellarator
Wall conditioning in magnetic controlled fusion devices is a common tool to improve plasma performance and discharge reproducibility [1]. It will be relied upon in the next W7-X operation phases (OP1.2 in 2017-2018 and OP2 starting in 2020) to control the surface state of the plasmafacing components (PFC) with the eventual aim of providing access to continuous discharge operation [2]. The super...
متن کاملCommissioning and early experience with a new generation low-energy linear accelerator in zahedan
Introduction: Since commissioning beam data are treated as a reference and ultimately used by treatment planning systems, it is vitally important that the collected data are of the highest quality to avoid dosimetric and patient treatment errors that may subsequently lead to a poor radiation outcome. Beam data commissioning should be performed with appropriate knowledge and pr...
متن کامل