Infrared light emitting device with two color emission

نویسنده

  • Naresh C. Das
چکیده

We have designed and fabricated two-color infrared light emitting diode (LED) emitting in the wavelength regions of 3–4 lm and 5–10 lm. The interband cascade (IC) LED device was grown on n-type GaSb substrate and has 30 cascaded stages for the long-wave infrared (LWIR) and 15 cascaded stages for the mid-wave infrared (MWIR) emission bands. The two active regions are separated by a 0.5 lm thick contact layer, which is used for biasing the two LEDs. Both room temperature and cryogenic temperature results show emission in the wavelength regions as designed. Published by Elsevier Ltd.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influences of Device Architectures on Characteristics of Organic Light-Emitting Devices Incorporating Ambipolar Blue-Emitting Ter(9,9-diarylfluorenes)

In this article, we report the studies of various device architectures of organic lightemitting devices (OLEDs) incorporating highly efficient blue-emitting and ambipolar carriertransport ter(9,9-diarylfluorene)s, and their influences on device characteristics. The device structures investigated include single-layer devices and multilayer heterostructure devices employing the terfluorene as one...

متن کامل

Influence of Light-Curing Units on Color Stability of Composite Resins After Aging

Background and Aim: The use of composite restorations has increased in recent years. One of the most important problems with composite restorations is the loss of consistency between the composite and tooth color, which in most cases requires replacement. Materials and Methods: In this study, the color stability of 40 disc-shaped specimens (10 mm in diameter and 2 mm in height) from two types ...

متن کامل

Comparative evaluation of the effect of Light Emitting Diode (LED) and Quartz Tungsten Halogen (QTH) light curing units on color stability of Filtek Z350 XT

Introduction:Discoloration of the resin-based composites is a common problem in restorative dentistry. There are many factors associated with the discoloration of dental materials in the oral environment. The purpose of this study was to evaluate the color changes in a nano-composite cured with a quartz-tungsten-halogen (QTH) and light emitting diode (LED) unit. Methods:80 disk-shaped specim...

متن کامل

Light Converting Inorganic Phosphors for White Light-Emitting Diodes

White light-emitting diodes (WLEDs) have matched the emission efficiency of florescent lights and will rapidly spread as light source for homes and offices in the next 5 to 10 years. WLEDs provide a light element having a semiconductor light emitting layer (blue or near-ultraviolet (nUV) LEDs) and photoluminescence phosphors. These solidstate LED lamps, rather than organic light emitting diode ...

متن کامل

Light extraction analysis and enhancement in a quantum dot light emitting diode.

We apply a rigorous dipole model to analyze the light outcoupling and angular performance of quantum dot light emitting diode (QLED). To illustrate the design principles, we use a red QLED as an example and compare its performance with an organic light emitting diode (OLED). By combining a high refractive index glass substrate with macroextractors, our simulation results indicate that the light...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010