Fuel Processors for PEM Fuel Cells
نویسندگان
چکیده
Objectives • Demonstrate high performance desulfurizer, catalyst, micro-reactor and microcombustor/ microvaporizer concepts that will enable production of compact fuel processors for proton exchange membrane (PEM) fuel cells • Design, fabricate and evaluate a 1-kWe fuel-flexible fuel processor during the first 36 months (one of the fuels capable of being reformed will be EPA Phase II reformulated gasoline) • Design, fabricate and evaluate a fuel-flexible fuel processor capable of producing up to 10 kWe hydrogen (one of the test fuels will be EPA Phase II reformulated gasoline)
منابع مشابه
A New Maximum Power Point Tracking Method for PEM Fuel Cells Based On Water Cycle Algorithm
Maximum Power Point (MPP) tracker has an important role in the performance of fuel cell (FC) systems improvement. Tow parameters which have effect on the Fuel cell output power are temperature and membrane water. So contents make the MPP change by with variations in each parameter. In this paper, a new maximum power point tracking (MPPT) method for Proton Exchange Membrane (PEM) fuel cell is pr...
متن کاملNumerical Modeling of an Innovative Bipolar Plate Design Based on the Leaf Venation Patterns for PEM Fuel Cells
Flow channel design on bipolar plates has a direct effect on Proton Exchange Membrane (PEM) fuel cell performance. It has been found out that the flow field design has a deterministic role on the mass transport and water management, and therefore on the achieved power in PEM Fuel cells. This study concentrates on improvements in the fuel cell performance through optimization of channel dimensio...
متن کاملDesign and Investigation of Honeycomb End Plates for PEM Fuel Cells
In this article a new structure of PEM fuel cell end plate is presented. The new structure is known as a honeycomb sandwich panel. Several properties of the presented structure, such as mechanical and thermal behavior, as well as its advantages and disadvantages are introduced. The aim of this paper is to reduce the weight of the while maintaining a better compression force on the PEM fuel cell...
متن کاملExperimental Study on a 1000W Dead-End H2/O2 PEM Fuel Cell Stack with Cascade Type for Improving Fuel Utilization
Proton exchange membrane fuel cells (PEMFCs) with a dead-ended anode and cathode can obtain high hydrogen and oxygen utilization by a comparatively simple system. Nevertheless, the accumulation of the water in the anode and cathode channels might cause a local fuel starvation degrading the performance and durability of PEMFCs. In this study, a brand new design for a polymer electrolyte membrane...
متن کاملEffect of CO in the reformatted fuel on the performance of Polymer Electrolyte Membrane (PEM) fuel cell
There are several obstacles to the commercialization of PEM fuel cells. One of the reasons is that the presence of carbon monoxide (CO) in the reformatted fuel, even at a very small scale, decreases the fuel cell performance. The aim of this paper is to investigate the effect of CO in reformatted fuel on PEM fuel cell performance. For this purpose, a steady state, one-dimensional and non-isoth...
متن کامل