Effect of reference microphone location and loudspeaker azimuth on probe tube microphone measurements.

نویسندگان

  • M A Ickes
  • D B Hawkins
  • W A Cooper
چکیده

The effects of loudspeaker azimuth and reference microphone location on probe tube microphone measures were assessed. The real ear unaided response (REUR), real ear aided response (REAR), and real ear insertion response (REIR) were obtained on a KEMAR. Aided measures were obtained with both a behind-the-ear and an in-the-ear hearing aid. All three measurements were affected by changes in the loudspeaker azimuth and reference microphone location. Responses obtained with a 90 degree loudspeaker azimuth or with the reference microphone located at-the-ear revealed greater disparity than those obtained under other conditions. Most of the differences occurred at frequencies above 2000 Hz, with measurements utilizing the behind-the-ear hearing aid showing greater dispersion. These results suggest that the location of the loudspeaker and the reference microphone are important variables when utilizing probe tube microphone measurements.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Probe-microphone measurements with body-worn instruments: loudspeaker and reference microphone effects.

Probe-microphone measurements are typically made with behind-the-ear (BTE) and in-the-ear (ITE) hearing aids with the loudspeaker located at 0-degrees or 45-degrees azimuth at head level and the reference microphone positioned on the head near the hearing aid microphone. With body-worn instruments, these conditions may not accurately reflect in situ hearing aid performance. This study compared ...

متن کامل

Fabrication and investigation of a transparent and flexible loudspeaker and microphone based on carbon nanotube

Transparent acoustic sensors and actuators are a new generation of acoustic transducers that can create an evolution in the microphone and loudspeakers industries. These transducers with properties like transparency, flexibility, flatness, very low weight and thickness have a great potential for various applications like public speakers, active noise cancelation systems, displays, cell phones a...

متن کامل

Effect of microphone location in ITE versus BTE hearing aids.

Sound pressure measurements were made at the hearing aid microphones of 20 subjects with their in-the-ear (ITE) hearing aids and a behind-the-ear (BTE) hearing aid to determine the influence of microphone location on hearing aid input. A probe tube microphone was used to measure the difference in dB SPL between the ITE and BTE microphone locations. ITE microphone location resulted in a maximum ...

متن کامل

The Effect of Corrugations on Mechanical Sensitivity of Diaphragm for MEMS Capacitive Microphone

In this paper the effect of corrugated diaphragm on performance of MEMS microphone is described. The corrugated diaphragm is modeled in order to improve the sensitivity of micromachined silicon acoustic sensor. Analytical analyzes have been carried out to derive mathematic expressions for the mechanical sensitivity and displacement of corrugated diaphragm with residual stress. It is shown that ...

متن کامل

Free-field Calibration of Mems Microphone Array Used for Acoustic Holography

The paper deals with method and methodology for calibration of the whole microphone array without the need of dismounting of each microphone and calibrating separately. This situation is usual with MEMS transducers which cannon be dismantled from the frame. The method is based on generation of spherical acoustic wave propagating in free-field and synchronously received by all microphones in the...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of the American Academy of Audiology

دوره 2 3  شماره 

صفحات  -

تاریخ انتشار 1991