Computational Study of Asynchronous Vibrations in a 1.5 Stage Transonic Compressor
نویسندگان
چکیده
The unsteady RANS equations are solved for the internal flow through the first one and a half stages of a transonic compressor operating in an off-design condition. To establish a steady performance prediction, the mixing-plane method is used and reasonable comparison to experimental data is obtained for the design configuration. To predict the fully unsteady flow, the sliding-mesh method is used. Examining the unsteady force on the blades, substantial subharmonic force fluctuations are shown to exist. The unsteady pressure signals from the domain also support the existence of these fluctuations. Views of the time-mean and notch filtered flow help to highlight the major features of the off-design flow field, and identify how these features relate to the subharmonic fluctuations in force and pressure.
منابع مشابه
Effect of aging and manufacturing tolerances on multi-stage transonic axial compressor performance
The Axial compressor is an integrated part of a gas turbine. The central part of compressors is its blades. Blade aerodynamic has a significant effect on compressor performance. Because of the adverse pressure gradient in the compressor, any deviation in the blade profile has a significant influence on the flow field as well as the compressor performance. During the manufacturing and operation ...
متن کاملComputational Assessment of a 3-stage Axial Compressor Which Provides Airflow to the Nasa 11- by 11-foot Transonic Wind Tunnel, including Design Changes for Increased Performance
New rotor blades are to be fabricated for the 24 foot diameter, 3-stage axial compressor which provides airflow in the 11by 11-Foot Transonic Wind Tunnel Facility at NASA Ames Research Center in Moffett Field, California. This presents an opportunity to increase the peak Mach number capability of the tunnel by redesigning the compressor for increased pressure ratio. Simulations of the existing ...
متن کاملVibration Analysis of an Air Compressor Based on a Hypocycloidal Mechanism: an Experimental Study
In this paper, the experimental vibration analysis of a single cylinder air compressor based on a hypocycloid straight line mechanism (HSM) is investigated. The HSM mechanism uses planetary gears to convert rotational motion to purely linear motion. In the conventional air compressor, the slider- crank mechanism is replaced by the HSM mechanism with appropriate counterweights. The constructed s...
متن کاملNumerical study of the effect of the tip gap size and using a single circumferential groove on the performance of a multistage compressor
The effect of the tip gap size on the performance of a multistage axial compressor was studied by means of computational fluid dynamics (CFD). It was found that the performance of the compressor was very sensitive to the size of the tip gap. By increasing the gap size, the stall margin value, the total pressure ratio and the compressor efficiency reduced considerably. The flow field at the tip ...
متن کاملConceptual Design of a Two Spool Compressor for the NASA Large Civil Tilt Rotor Engine
This paper focuses on the conceptual design of a two spool compressor for the NASA Large Civil Tilt Rotor engine, which has a design-point pressure ratio goal of 30:1 and an inlet weight flow of 30.0 lbm/sec. The compressor notional design requirements of pressure ratio and low-pressure compressor (LPC) and high pressure ratio compressor (HPC) work split were based on a previous engine system s...
متن کامل