Multihunch Beam Break - up in Detuned Structures
نویسندگان
چکیده
A b&act A key problem in next-generation linear collider designs utilizing multibunching is the control of multibunch beam break-up. One method of controlling the break-up is detuning, i.e., varying the frequency of the transverse deflecting modes by varying the cell dimensions within the.accelerating structures. In this case, the beam break-.up is sensitive to the resonances between the bunch frequency and some of the deflecting mode frequencies. It is also sensitive to errors in the fabrication and alignment of the accelerating structures. We examine these effects in the context of the SLAC NLC design.
منابع مشابه
An Investigation of Optimised Frequency Distributions for Damping Wakefields in X-band Linacs for the Nlc
In the NLC (Next Linear Collider) small misalignments in each of the individual accelerator structures (or the accelerator cells) will give rise to wakefields which kick the beam from its electrical axis. This wakefield can cause BBU (Beam Break Up) or, at the very least, it will dilute the emittance of the beam. Several Gaussian detuned structures have been designed and tested [1] at SLAC and ...
متن کاملWire Measurement of Impedance of an X-band Accelerating Structure
Several tens of thousands of accelerator structures will be needed for the next generation of normal conducting linear colliders known as the GLC/NLC (Global Linear Collider/Next Linear Collider). To prevent the beam being driven into a disruptive BBU (Beam Break-Up) mode or at the very least, the emittance being significantly diluted, it is important to damp down the wakefield left by driving ...
متن کاملEmittance Dilution and Beam Break up in the Jlc/nlc
The passage of a multi-bunch beam through an X-band accelerator with cells and structures misaligned gives rise to wakefields which disrupt succeeding bunches. As a consequence, there is growth in the overall emittance of the final colliding bunches. Here we study this process in the context of a JLC-NLC which employs the recently developed RDDS (Rounded Damped Detuned Structures) accelerators ...
متن کاملDesign and Simulation of Accelerating Structures for Future Linear Colliders
In order to obtain high luminosity and energy efficiency in future linear colliders, it is desirable to accelerate a train of closely spaced bunches on each rf pulse of the machine. There can be severe multibunch beam break-up in such a collider unless some means of strongly suppressing the transverse wakefield is incorporated into the design of the accelerating structures. Two methods of wakef...
متن کاملScattering Matrix Analysis of the Nlc Accelerating Structure
In the Next Linear Collider (NLC)[1], long trains of short, intense bunches are accelerated through the linac on their way to the collision point. One serious problem that needs to be addressed is the multi–bunch, beam break–up instability in the linac. To counteract this instability the accelerating structures are designed so that the dipole mode wakefields are detuned and weakly damped. Detun...
متن کامل