1 Structural , dielectric and ferroelectric properties of ( Bi , Na ) TiO 3 - BaTiO 3 system studied by high throughput screening Brian
نویسندگان
چکیده
Thin-film materials libraries of the Bi2O3-Na2O-TiO2-BaO system in a broad composition range have been deposited in ultra-high vacuum from elemental evaporation sources and an oxygen plasma source. A high throughput approach was used for systematic compositional and structural characterization and the screening of the dielectric and ferroelectric properties. The perovskite (Bi,Na)TiO3-BaTiO3 phase with a Ba concentration near the morphotropic phase boundary (ca. 6 At. %) exhibited a relative dielectric permittivity of 180, a loss tangent of 0.04 and remnant polarization of 19 μC/cm. Compared to published data, observed remnant polarization is close to that known for epitaxially grown films but higher than the values reported for polycrystalline films. The high throughput methodology and systematic nature of the study allowed us to establish the composition boundaries of the phase with optimal dielectric and ferroelectric characteristics.
منابع مشابه
Comparative Study of Ferroelectric and Piezoelectric Properties of BNT-BKT-BT Ceramics near the Phase Transition Zone
We report a comprehensive comparative study of ferroelectric and piezoelectric properties of BNT-BKT-BT ceramics through the MPB (morphotropic phase boundary) zone, from the rhombohedral to the tetragonal phases in the system (97.5-x)(Bi0.5Na0.5)TiO₃ + x(Bi0.5K0.5)TiO₃ + 2.5(BaTiO₃), where x = 0 to 24.5 mol %. The structural transitions were studied by XRD patterns and Raman spectra. The MPB wa...
متن کاملnd - m at . m tr l - sc i ] 2 5 A ug 1 99 9 Theory of PbTiO 3 , BaTiO 3 , and SrTiO 3 Surfaces
First-principles total-energy calculations are carried out for (001) surfaces of the cubic perovskite ATiO 3 compounds PbTiO 3 , BaTiO 3 , and SrTiO 3. Both AO-terminated and TiO 2-terminated surfaces are considered, and fully-relaxed atomic configurations are determined. In general, BaTiO 3 and SrTiO 3 are found to have a rather similar behavior, while PbTiO 3 is different in many respects bec...
متن کاملThick lead-free ferroelectric films with high Curie temperatures through nanocomposite-induced strain.
Ferroelectric materials are used in applications ranging from energy harvesting to high-power electronic transducers. However, industry-standard ferroelectric materials contain lead, which is toxic and environmentally unfriendly. The preferred alternative, BaTiO(3), is non-toxic and has excellent ferroelectric properties, but its Curie temperature of ∼130 °C is too low to be practical. Strain h...
متن کاملControlling internal barrier in low loss BaTiO 3 supercapacitors
Supercapacitor behavior has been reported in a number of oxides including reduced BaTiO 3 ferroelectric ceramics. These so-called giant properties are however not easily controlled. We show here that the continuous coating of individual BaTiO 3 grains by a silica shell in combination with Spark Plasma Sintering is a way to process bulk composites having supercapacitor features with low dielectr...
متن کاملAdvances in Lead-Free Piezoelectric Materials for Sensors and Actuators
Piezoelectrics have widespread use in today's sensor and actuator technologies. However, most commercially available piezoelectric materials, e.g., Pb [Zr(x)Ti(1-x)] O(3) (PZT), are comprised of more than 60 weight percent lead (Pb). Due to its harmful effects, there is a strong impetus to identify new lead-free replacement materials with comparable properties to those of PZT. This review highl...
متن کامل